Best current price£104.94from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£104.94Visit shop Eaton Industries Eaton Installation Contactor 230Vac 50Hz 63A 4No 3Hp - 248856
Visit shop7 offers from £104.94 - £362.62
View price history by clicking the chart icon.
The Eaton Installation Contactor (Z-SCH230/63-40) is designed for industrial control and automation professionals needing a reliable remote switching solution. Its key benefit is managing high current loads (up to 63A) with four normally open contacts for versatile circuit control. A potential caveat for some users might be its specific 230V AC control circuit voltage requirement, necessitating careful system integration.
| Series | Z-SCH230/63-40 |
|---|---|
| Model Part Number | 248856 |
| Brand | Eaton |
The contactor has a rated operational voltage of 440V.
This model features four normally open (N/O) contacts.
The required control voltage is 230V AC.
It is designed for mounting on a standard 35mm top-hat rail.
It complies with IEC 61095, EN 61095, VDE 0660, IEC 60947-4-1, and EN 60947-4-1.
This contactor is designed for AC circuits. Its specifications, including the control voltage and standards, are for AC applications.
It can handle a maximum incandescent lamp load of 7740W.
Verify that the control circuit voltage supplied to terminals A1 and A2 is within the 195.5 - 253V AC range and is stable. Check all wiring connections for security and correctness.
This indicates a failure under load. The contactor may need replacement. Ensure the load current does not exceed the 63A rating and that the load type is appropriate for the contactor's specifications.
Check if the load current exceeds the 63A rating. Ensure adequate ventilation around the contactor within the enclosure. Verify that connections are tight, as loose connections can cause excessive heat.
Setup: This contactor is designed for mounting on a standard 35mm top-hat rail within an electrical enclosure. Ensure the power to the control circuit and the main power circuit is switched off before installation. Connect the control voltage to terminals A1 and A2. Wire the main load circuits through the power terminals and the four N/O contacts. Adhere strictly to local electrical codes and safety regulations during installation.
Compatibility: The device requires a 230V AC control circuit voltage. It is compatible with systems adhering to IEC and EN standards. The 45mm front dimension and 3 SU (52.5mm) width ensure it fits within standard modular enclosures.
Care: No user-serviceable parts are inside. Periodically inspect the connections for tightness and any signs of thermal stress. Ensure ventilation around the contactor is adequate, especially in enclosed panels, to prevent overheating.
