Best current price£19.99from eBay
Shopping.co.uk recommended and popular offers
eBay£19.99Visit shop 3x Bartoline Direct to Rust Stove & BBQ Paint Black Protective Coating 400mL
Visit shop
B&Q£33.99Visit shop B&Q - 3X Direct To Rust Stove & Bbq Paint Black Protective Coating 400Ml
Visit shop3 offers from £19.99 - £33.99
View price history by clicking the chart icon.
Bartoline Direct to Rust Stove & BBQ Paint is an ideal solution for DIYers and homeowners looking to restore or protect metal surfaces that are frequently exposed to high heat. Designed for versatility, this all-in-one coating acts as a primer, undercoat, and topcoat in one, providing excellent corrosion resistance for stoves, BBQ grills, and automotive parts. While it offers impressive durability and heat tolerance up to 200°C, users must ensure the surface is meticulously prepared and applied in a well-ventilated environment to achieve professional-grade results.
| Colour | Black |
|---|---|
| Model Part Number | PP6205 |
| Brand | Bartoline |
| Container Volume | 1200 |
This paint is designed for the exterior of stoves and BBQ bodies. It is not intended for food-contact surfaces.
No, it is an all-in-one formula that functions as a primer, undercoat, and topcoat.
Allow the paint to cure completely according to the drying time instructions on the label before exposing it to high heat.
This specific product is formulated in a standard black finish.
Yes, provided the old paint is stable and well-adhered; sand the surface lightly to ensure the new coat bonds effectively.
You are likely holding the can too close or applying the coats too heavily. Use lighter, faster passes.
The surface was likely not cleaned thoroughly before application or the temperature exceeded the 200°C limit.
Turn the can upside down and spray for a few seconds to clear the nozzle after each use.
Before application, ensure the metal surface is free of grease, oil, and loose debris. If applying over rusted areas, remove any flaking rust with a wire brush for better adhesion. Shake the aerosol can vigorously for at least two minutes to ensure the pigments are thoroughly mixed. Hold the can 15-25cm away from the surface and use smooth, sweeping strokes. Allow 15-20 minutes of drying time between layers. After completing your project, it is recommended to store the can in a cool, dry place. Always perform a test spray on an inconspicuous area if you are unsure of material compatibility.
