Bosch Powertool Accessories - S1159XHM Expert Multi Material Blade - 225mm - 6-8 TPI

This blade is designed for multi-material cutting and can effectively cut wood, metal, plastics, and construction composites, including pre-fab elements often found on building sites.

The S1159XHM EXPERT Multi Material Blade is engineered to last up to 50 times longer than standard blades like the Bosch S3456XF when cutting tough materials.

Progressive tooth pitch means the spacing between the teeth gradually changes. For this blade, it's 6-8 TPI (3.0-4.0mm), which allows it to efficiently cut through both thin and thick materials effectively.

The blade features an S-shank, making it compatible with all reciprocating saws that accept this standard shank type.

While versatile, the progressive tooth pitch is optimized for general construction cutting. For very fine or intricate cuts in specific materials, a specialized blade might offer superior results.

Bosch Carbide Technology involves embedding hard carbide particles onto the blade's teeth. This significantly increases the blade's durability, wear resistance, and ability to cut through very hard materials.

Ensure the blade is correctly installed and securely clamped. Check if the material being cut is within the blade's intended range. The material may be too hard, or the blade might be dull from extensive use.

Verify the blade is fully seated and properly tightened in the saw's clamp. Ensure the material is stable and properly supported. Consider if the saw's speed setting is appropriate for the material.

Avoid applying excessive side pressure to the blade, as this can cause it to snap. Ensure you are using the correct saw speed for the material. Check for unseen obstructions in the material.