Best current price£21.18from eBay
Shopping.co.uk recommended and popular offers
eBay£21.18Visit shop Pneumatic Air Line Fitting T-Piece Tee piece 1/2 BSP Female Threads Steel 2pc
Visit shop2 offers from £21.18
View price history by clicking the chart icon.
This AB Tools Pneumatic Air Line T-Piece fitting is designed for professionals and occasional users needing to efficiently split air or hydraulic lines in garage or workshop environments. Its key benefit is enabling the connection of two pipes to diverge, facilitating complex air system setups with a high flow rate ideal for industrial tools. A caveat is understanding that the '1/2 BSP' designation refers to thread standard, not the physical diameter.
| Model Part Number | PCL062_2PK |
|---|---|
| Brand | AB Tools |
BSP stands for British Standard Pipe. '1/2' refers to the nominal size of the pipe thread, not its actual diameter. It's a thread standard commonly used in the UK and many other countries for pneumatic and hydraulic systems. Ensure your other fittings are also 1/2 BSP.
While BSP threads are used in plumbing, these specific fittings are designed and plated for pneumatic and hydraulic applications. Using them for potable water systems is not recommended due to potential material or plating compatibility issues.
Yes, the 1/2 BSP fitting allows for a high flow rate, making it suitable for demanding tools like impact wrenches that require a significant volume of air to operate effectively.
The fittings are manufactured from steel with a plated finish for strength and corrosion protection.
This listing is for a pack of 2 x 1/2 BSP T-Pieces.
It is generally recommended to use PTFE (thread sealant) tape on the male threads before connecting to ensure a robust, leak-free seal, especially in high-pressure pneumatic or hydraulic systems.
Specific pressure ratings are not provided in the product description. However, steel construction with plating suggests suitability for standard workshop pneumatic and hydraulic pressures. Always ensure compatibility with your system's operating pressure.
Check that male fittings are fully seated and properly tightened. Ensure both the T-piece and male fittings have clean, undamaged 1/2 BSP threads. Consider using thread sealant tape (PTFE tape) on the male threads for a better seal.
Verify that you are using 1/2 BSP male fittings. Ensure threads on both the T-piece and the male fitting are clean and free from debris. Attempt to start threading by hand to avoid cross-threading, then use a wrench for final tightening.
Wipe the fitting with a clean cloth. Minor surface corrosion on the plating can often be cleaned. For significant corrosion, the fitting may need replacement to ensure system integrity.
Ensure the T-piece is correctly installed and not obstructing flow. Confirm that the 1/2 BSP size is adequate for the tools being used and that the air compressor is providing sufficient pressure and volume.
Setup:
Compatibility:
Care:
