GVS Elipse ABE1P3 Replacement Filters - Pair
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
These GVS Elipse ABE1P3 Replacement Filters are designed for professionals in chemical production and handling environments, offering protection against multigas and dust (excluding ammonia). Their key benefit is comprehensive protection and reduced user fatigue due to low breathing resistance, though users must ensure they are not exposed to ammonia risks. The filters integrate activated carbon for gas protection with HESPA synthetic media for particulate filtration, offering a reliable solution for hazardous environments.
All features
| Brand | GVS |
|---|
Extended Product Information
FAQs
What specific contaminants do these ABE1P3 filters protect against?
These filters protect against organic gases, inorganic gases, formaldehyde, chemical gases, and dust. They are not effective against ammonia.
How long do these filters typically last?
Under normal conditions and when stored properly, the filters can last up to 3 years from the date they are removed from their sealed packaging. Actual lifespan depends on usage and exposure levels.
Can I use these filters with any respirator mask?
No, these filters are specifically designed for and compatible only with GVS Elipse SPR580/SPR581 and GVS Integra SPR583/SPR584 mask models.
How do I know when to replace the filters?
Replace filters if you notice increased breathing resistance, if the filters are damaged, or after the maximum recommended service life of 3 years from opening. Always follow your workplace safety guidelines for filter replacement.
What is the benefit of 'low breathing resistance'?
Low breathing resistance means less effort is required to inhale and exhale, which significantly reduces physical fatigue during prolonged use and increases overall comfort for the wearer.
Are these filters suitable for environments with ammonia?
No, these ABE1P3 filters are explicitly recommended for multigas and dust risks *excluding ammonia*. For ammonia protection, different filter types would be required.
How should I store the filters when not in use?
Store unused filters in their original, sealed packaging in a cool, dry location away from direct sunlight and potential contaminants. This preserves their integrity and lifespan.
Troubleshooting
Difficulty breathing through the mask
Check if the filters are correctly installed and fully locked. Ensure the mask itself is not damaged and provides a proper seal. The filters may also be nearing the end of their service life and require replacement.
Mask does not seal properly
Ensure your face is clean and free of oils or cosmetics. Adjust the head straps for a snug fit. If the mask material is damaged, it may need replacement. Ensure the correct mask size is being used for your face shape.
Filters appear damaged
If the filter housing (ABS shell or particulate media) is cracked, torn, or otherwise compromised, do not use the filters. Replace them immediately with new, undamaged filters.
Pros and Cons
Pros
- Provides broad protection against various gases and dust.
- Low breathing resistance enhances user comfort and reduces fatigue.
- Integrated design simplifies maintenance and ensures effective filtration.
- Durable construction ensures longevity in demanding environments.
- Easy to replace, allowing for quick mask readiness.
Cons
- Not suitable for protection against ammonia.
- Requires compatible GVS Elipse or Integra mask models.
- Performance is dependent on correct fitting and usage.
Setup, Compatibility & Care
Compatibility: These ABE1P3 filters are specifically designed for use with the following GVS mask models:
- GVS Elipse SPR580 (S/M size)
- GVS Elipse SPR581 (M/L size)
- GVS Integra SPR583 (S/M size)
- GVS Integra SPR584 (M/L size)
Setup: Filter replacement is straightforward. Ensure the mask is clean and dry. Align the new filters with the mask's filter ports and twist clockwise until they lock into place. Always refer to your specific GVS mask's user manual for detailed instructions.
Care: Store filters in their original, sealed packaging in a cool, dry place away from direct sunlight and contaminants. Do not immerse filters in water. After use, clean the mask according to the manufacturer's instructions. Filters should be replaced when breathing becomes difficult, if they are damaged, or after the recommended lifespan (up to 3 years from opening the packaging, or when the specific task dictates replacement based on exposure levels).