Malco Turbo Shear Attachment - TSNS1
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Malco Turbo Shear Attachment (TSNS1) is designed for roofing professionals and contractors who need to make precise cuts in natural roofing slate. Its key benefit is enabling fast, clean straight, angled, or curved cuts, mimicking a hand-cut appearance with ease. A potential caveat is its specific material limitation to 4mm-8mm natural roofing slate. This attachment is lightweight, compact, and portable, fitting corded or cordless drills, with replaceable blades and skid plates for on-the-job maintenance.
All features
| Model Part Number | TSNS1 |
|---|---|
| Brand | Malco |
Extended Product Information
FAQs
What types of slate can this attachment cut?
This attachment is specifically designed for 4mm to 8mm natural roofing slate.
What kind of drill do I need?
You can use either a corded or a cordless drill with a standard chuck that can securely hold the attachment.
Can I cut metal or plastic with this tool?
No, this attachment is only designed for natural roofing slate within the specified thickness range. Attempting to cut other materials may damage the tool and yield poor results.
How do I know when to replace the blades?
You will notice a decrease in cutting performance, a rougher cut edge, or increased effort required to make a cut. The blades are designed to be replaceable on the job.
Is this attachment heavy?
No, it is very lightweight, weighing only 0.15 pounds, making it easy to handle and maneuver.
Does it come with a drill?
No, this is an attachment that requires a separate corded or cordless drill to operate.
What kind of finish does it provide?
It provides a desirable hand-cut appearance on the edges of the slate.
Troubleshooting
Attachment not cutting slate cleanly
Check if the blades are dull or damaged. Replace the blades if necessary. Ensure the correct thickness of natural roofing slate (4mm-8mm) is being used.
Drill struggles to power the attachment
Verify that the drill has sufficient power and battery charge. Ensure the slate is not excessively thick or hard. Check for any obstructions in the attachment's mechanism.
Attachment seizes during cut
Ease up on the pressure and guide the attachment smoothly. Ensure you are not forcing the cut. Check the skid plate for damage and ensure it is making proper contact.
Excessive vibration during operation
Ensure the attachment is securely fastened to the drill chuck. Check for damage to the blades or internal components. Try a different drill if the issue persists.
Pros and Cons
Pros
- Efficiently cuts natural roofing slate.
- Produces a clean, professional finish.
- Lightweight and portable design for easy handling.
- Compatible with most corded and cordless drills.
- On-site repairable with replaceable parts.
Cons
- Limited to cutting 4mm to 8mm natural roofing slate.
- Requires a separate drill to operate.
- May require practice to achieve perfect curves.
- Wear and tear on blades will necessitate replacements over time.
Setup, Compatibility & Care
Setup: Securely attach the Malco Turbo Shear to the chuck of your corded or cordless drill. Ensure it is tightened properly according to your drill's manual.
Compatibility: This attachment is designed for use with standard drills and is specifically intended for cutting 4mm to 8mm natural roofing slate. It is not designed for other materials such as metal, plastic, or composite shingles.
Care: Regularly inspect the blades and skid plate for wear. Replace them as needed using a suitable tool. Keep the attachment clean by wiping it down with a dry or slightly damp cloth after use. Store in a dry location to prevent rust. Avoid abrasive cleaners.