Living and Home 3D Glass Effect Backsplash Tile - 30.5 x 30.5cm

Yes, provided the existing tiles are smooth, clean, and not loose or damaged.

While they are moisture-resistant, they are not intended for high-heat areas like direct contact with gas stove flames.

They are designed as a semi-permanent solution. Removal may require a heat gun to soften the adhesive, though paint damage is possible on older or delicate surfaces.

They are water-resistant, but it is not recommended to place them in areas of direct, constant water spray, such as inside a shower stall.

Measure the total width and height of the area in centimeters. Divide the total area by 930 (the area of one 30.5x30.5cm tile) and add 10% for waste and trimming.

Ensure the wall was degreased and perfectly dry before application; apply extra pressure to the edges or use a small amount of clear silicone caulk if the surface is slightly uneven.

Use a plastic squeegee or a soft cloth to gently push air toward the nearest edge; for stubborn bubbles, carefully lift the corner and re-apply.

Use a metal straight-edge ruler as a guide and a sharp utility knife to score the tile, then snap it along the score line.