Kenable DC Power Extension Cable - 5m - White

This cable is primarily designed for extending DC power connections for CCTV equipment, but it can also be used for other low-wattage appliances (up to 60W) that use a 2.1mm DC power plug.

You need to confirm that your device uses a 2.1mm DC power plug and socket. Many CCTV systems use this size, but it's essential to check your device's specifications or consult the manufacturer, as other common sizes like 5.5mm exist.

The cable is rated for a maximum of 60 watts (W) or 60 volt-amperes (VA).

No, this cable is only rated for low-wattage appliances up to 60W and is not suitable for higher-power devices such as laptop chargers.

Yes, the extension cable has a female socket on one end to receive the original power cable and a male plug on the other end to connect to the device.

The cable has an outer diameter (OD) of approximately 3mm.

The cable is a standard coax-type cable designed for flexibility, but it should not be sharply bent or kinked to avoid internal damage.

Verify that all connections are secure. Ensure the original power adapter is functioning correctly and providing the correct voltage. Double-check that the extension cable's plug and socket are the correct size (2.1mm) for your device and that the total power draw does not exceed the cable's 60W rating.

Check for loose connections at both ends of the extension cable and at the device. Inspect the cable for any visible signs of damage, such as cuts or kinks. If damage is found, the cable should be replaced.

This cable is specifically designed for 2.1mm connectors. If your device requires a different size (e.g., 5.5mm outer barrel with a 2.5mm pin), you will need to purchase a compatible extension cable for that specific size.