Best current price£82.19from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£82.19Visit shop Pipercross Powercone Air Filter - 63 x 150 x 150 x 65 mm Foam Top
Visit shop3 offers from £82.19
View price history by clicking the chart icon.
The Pipercross Powercone Foam Top Universal Air Filter is designed for drivers of turbocharged and injection engine applications, particularly those building custom or one-off induction systems. Its key benefit lies in optimizing airflow for increased engine performance through a full radius ram pipe and high-performance foam. A potential caveat is its universal fitment, which may require custom adaptation for specific engine bays.
| Model Part Number | C7001 |
|---|---|
| Brand | Pipercross |
The main advantage is its ability to optimize airflow into the engine, especially for turbocharged applications, through its full radius ram pipe design, leading to improved performance.
While primarily developed for turbocharged and injection applications, its airflow characteristics can potentially benefit some high-performance naturally aspirated engines, particularly in custom intake setups.
Cleaning frequency depends on operating conditions. In dusty environments, more frequent cleaning is advised. Generally, inspect every few thousand miles and clean when visibly dirty.
The neck of the filter is made from spun aluminium.
This filter is designed for custom/one-off induction systems and is not typically a direct replacement for stock air filters. Modifications would likely be required.
The filter is typically supplied dry and requires oiling after its initial cleaning or if using a specific re-oiling kit. Check the product packaging or accompanying instructions.
The dimensions are 63 x 150 x 150 x 65 mm. The 63mm and 65mm likely refer to the neck diameter at each end, with 150mm representing height and width.
Ensure the filter is correctly installed and not collapsing under suction. Check for any leaks in the custom intake piping. Verify the filter is clean and not clogged.
Confirm the dimensions of the intake pipe match the filter's neck diameter. Use appropriate clamps or adapters if needed for a secure seal.
The filter may require cleaning or re-oiling. Ensure the foam is intact and free from tears. If damage is present, the filter may need replacement.
Setup: The Pipercross Powercone is designed for custom applications. Installation will vary depending on the specific induction system being built. Ensure the aluminium spun neck has a secure fit to the intake piping. Professional installation is recommended if you are unfamiliar with custom intake fabrication.
Compatibility: This is a universal fit filter. While it is ideal for custom/one-off induction systems, it is not a direct replacement for most factory air filters. Verify the dimensions (63 x 150 x 150 x 65 mm) and the neck size to ensure compatibility with your custom piping.
Care: The high-performance foam filter element should be cleaned periodically to maintain optimal airflow. Use a dedicated Pipercross cleaning kit or a mild soap and water solution. Rinse thoroughly and allow the filter to air dry completely before re-oiling (if required by the specific cleaning kit instructions) and reinstalling. Never use high-pressure air to clean the filter, as this can damage the foam.
