VEVOR Sand Spike Boat Anchor - 985 mm

Best current price£19.88from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£19.88Visit shop VEVOR Sand Spike Boat Anchor Pole for Boats Jetski Kayak Boating w/Storage Bag
Visit shop
Best current price£19.88from eBay
Shopping.co.uk recommended and popular offers
eBay£19.88Visit shop VEVOR Sand Spike Boat Anchor Pole for Boats Jetski Kayak Boating w/Storage Bag
Visit shop2 offers from £19.88 - £19.90
View price history by clicking the chart icon.
The VEVOR Sand Spike Boat Anchor is an essential tool for boaters, jet ski enthusiasts, and kayakers who frequent shallow water environments. Designed for quick and secure mooring in soft or hard sand, this self-hammering anchor provides reliable stability for your watercraft in both fresh and saltwater conditions. While it is highly efficient in sandy bottoms, users should be aware that this specific anchor design is not intended for use in rocky, muddy, or heavy vegetation substrates.
| Model Part Number | AN62-4.55 |
|---|---|
| Brand | VEVOR |
No, this anchor is designed specifically for sand and will not penetrate rocky, clay, or dense mud bottoms effectively.
It is constructed from galvanized carbon steel, which offers excellent corrosion resistance, but regular rinsing is required to maintain the finish.
Drive the anchor until the base collar is level with or slightly below the surface of the sand for the most secure hold.
No, the package includes the anchor and an Oxford cloth storage bag; you will need to provide your own mooring line.
This anchor is intended for smaller watercraft such as jet skis, kayaks, and small pontoons; it is not rated for large vessels.
Yes, you can hand wash the Oxford cloth bag with mild soap and water, then let it air dry.
Check if the sand is too rocky or packed with debris; ensure the spike point is clear of obstruction.
Wiggle the anchor back and forth in a circular motion to break the suction seal before pulling it vertically.
Use a wire brush to remove the rust and apply a thin coat of marine-grade protective oil or anti-corrosion spray.
Setup is straightforward: clear a space in the sand, align the spike, and utilize the slide-hammer mechanism until the anchor is secure. It is compatible with a wide range of watercraft including personal watercraft (PWC), kayaks, and smaller pontoons. To maintain the life of your anchor, rinse it thoroughly with fresh water after every use, especially after saltwater excursions, to prevent salt crystallization and corrosion. Allow it to air dry completely before placing it inside the included storage bag to prevent moisture buildup.