Best current price£15.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.99Visit shop B&Q - Brass Water Pipe Male Elbow Adapter Connector 3/4 Inch Bsp Thread Fittings
Visit shop1 offer from £15.99
View price history by clicking the chart icon.
This Ravani 3/4 inch BSP Male Elbow Adapter Connector is designed for plumbing professionals and DIY enthusiasts needing a robust and reliable solution for connecting pipes carrying air, fuel, or water. Its durable brass construction and gold tone finish ensure longevity, providing a secure two-way connection. A key benefit is its ease of installation due to the equal male thread design, though users should be mindful of the maximum pressure and temperature ratings to prevent damage.
| Brand | Ravani |
|---|
BSP stands for British Standard Pipe. 'Male' refers to the external threads on the fitting. 'Elbow' indicates it's designed for a 90-degree connection, and 'Adapter' signifies its role in connecting two pipes. This specific item has two male threads for connecting two other fittings or pipes.
The adapter is rated for a maximum pressure of 1.0 MPa, which is equivalent to 10 bar or approximately 145 psi.
This adapter is rated for a maximum temperature of +100°C. It may not be suitable for high-temperature steam applications that exceed this limit.
This adapter is designed for connecting pipes carrying air, fuel, and water. Always ensure the fluid is compatible with brass and within the specified pressure and temperature limits.
Use appropriate thread sealant such as PTFE tape or pipe dope on the male threads before connecting. Ensure fittings are tightened securely but not over-tightened.
Yes, the durable brass construction and gold tone finish offer good resistance to environmental factors, making it suitable for outdoor applications provided the temperature and pressure ratings are not exceeded.
Ensure thread sealant (PTFE tape or pipe dope) was applied correctly and sufficiently. Verify that both fittings are properly tightened and that the BSP threads are compatible and undamaged.
Check for any debris or damage on the threads of both the adapter and the pipe. Ensure you are using a 3/4 inch BSP male fitting and that the pipe's thread is also BSP compatible.
Clean the affected area with a mild brass cleaner. If the corrosion is severe, inspect the adapter for structural integrity. Ensure the fluid being conveyed is compatible with brass.
Setup: To install, ensure the male BSP threads on both the adapter and the connecting pipes are clean and free from debris. Screw the adapter onto one pipe end and then connect the other pipe to the adapter's second male thread. Use appropriate thread sealant (like PTFE tape or pipe dope) on the threads before tightening to ensure a leak-proof seal. Tighten securely with a wrench, but avoid over-tightening, which can damage the threads or the fitting.
Compatibility: This adapter uses 3/4 inch BSP (British Standard Pipe) male threads. Ensure all connecting pipes and fittings also conform to BSP standards for a proper fit. It is designed for use with air, fuel, and water. Do not use with incompatible substances or fluids that exceed its temperature or pressure ratings.
Care: The brass construction is generally low maintenance. Clean the exterior with a soft, damp cloth. If any signs of significant corrosion or buildup occur over time, a mild brass cleaner can be used, followed by rinsing and drying. Periodically check connections for tightness, especially in systems with frequent pressure fluctuations.
