Best current price£130.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£130.00Visit shop B&Q - I.life S Gloss White Rectangular Wall-Mounted Basin (W)45Cm
Visit shop1 offer from £130.00
View price history by clicking the chart icon.
The Ideal Standard I.life S Wall-Mounted Basin is designed for homeowners seeking a modern, space-saving, and stylish sink solution for their bathrooms. Its key benefit is the combination of a sleek, minimalist aesthetic with a practical, generous basin capacity. A potential caveat is its wall-mounted nature, requiring specific installation considerations.
| Brand | Ideal Standard |
|---|
The basin is 45cm in width. Specific depth and height dimensions should be confirmed with the product's technical specifications sheet.
Typically, the basin is sold separately from taps and waste fittings. These will need to be purchased in addition.
This model is specifically designed as a wall-mounted basin. While some basins can be adapted, it is recommended to use it as intended for optimal performance and aesthetics.
The basin has a generous capacity of 1.3 litres.
This information should be checked against the specific product listing or technical drawing, as some minimalist designs may require drilling on-site.
A solid or reinforced stud wall is recommended to safely support the weight of the basin when filled with water. Plasterboard alone may not be sufficient without appropriate backing.
Ideal Standard typically offers a substantial warranty on their sanitaryware. Please refer to the manufacturer's warranty documentation for precise details.
Check the basin waste and trap for any blockages. Ensure the waste pipe is clear and has an adequate fall.
Tighten the tap's mounting screws or check the sealing washer. If the issue persists, the tap may need replacement.
Ensure the tap flow is not too high for the basin depth. Consider adjusting the flow rate on the tap or installing a flow restrictor.
Clean with a non-abrasive cleaner specifically designed for vitreous china. Avoid using harsh chemicals or abrasive pads.
Setup:
This basin is designed for wall mounting. Professional installation is recommended to ensure secure fixing and proper plumbing connections. Ensure the wall is structurally sound to support the basin and water load. The basin typically requires a standard basin waste and a compatible tap (usually single-hole, monobloc).
Compatibility:
Compatible with most standard basin wastes and bottle traps. Taps should be selected based on the number and position of pre-drilled holes (if any) or by drilling appropriate holes during installation. Wall mounting hardware is typically included or specified by the installer.
Care:
Clean regularly with a soft, damp cloth and a mild, non-abrasive detergent. Rinse thoroughly and dry with a clean cloth. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the glossy finish.
