Grainline Studio Thayer Jacket Sewing Pattern

This pattern is rated for intermediate sewers due to techniques like setting in sleeves and lining construction.

The pattern typically includes a range of sizes, usually detailed on the pattern envelope. Please refer to the specific pattern packaging for exact size ranges.

While you can experiment, using fabrics within the recommended weight and structure will yield the best results for fit and drape. Very lightweight or stretchy fabrics may not create the intended structure.

Fabric requirements vary based on size and fabric width. Detailed yardage information for different sizes and fabric widths is included on the pattern instructions.

The pattern is designed for buttons and buttonholes, but you can adapt it for other closures like zippers or snaps if desired.

It is not recommended for absolute beginners. An intermediate sewer with some experience in garment construction will find it more manageable.

While possible, the pattern is drafted with lining in mind for structure and finish. Omitting it would require adjustments to seam finishing and might alter the drape.

Ensure you have accurately measured your bicep and compared it to the pattern's measurements. Consider adding a small amount of ease to the sleeve cap or side seam if necessary.

Verify that you have correctly sewn the princess seams and shoulder seams. Check that the grainline is followed precisely when cutting fabric pieces. A small adjustment to the shoulder seam might be needed.

Ensure pocket pieces are cut accurately and sewn with a consistent seam allowance. Press seams carefully during construction. If using inseam pockets, check that the stitching line is even.

Make sure the lining pieces are cut precisely and pressed well. Baste the lining to the fashion fabric before proceeding with final seams. Ensure that the lining is not stretched as you sew it.