Best current price£2.28from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£2.28Visit shop Polypipe Bent Overflow Tank Connector 21.5mm White VP50W for Sanitaryware and Storage Tanks
Visit shop1 offer from £2.28
View price history by clicking the chart icon.
The Polypipe Overflow Tank Connector Bent 21.5mm is designed for professional plumbers and DIY enthusiasts managing water overflow in sanitaryware, storage tanks, and heating systems. It provides a secure, leak-resistant solution for directing excess water safely away from tanks, though it requires solvent weld preparation to achieve a permanent and reliable seal.
| Model Part Number | VP50W |
|---|---|
| Brand | Polypipe |
No, this connector is designed exclusively for solvent welding and will not provide a reliable, leak-proof seal with push-fit systems.
You will need a pipe cutter or fine-toothed hacksaw, a file for deburring, and appropriate solvent weld cement.
This connector is intended for overflow management and is not designed to handle high-temperature pressurized hot water systems.
Yes, it can be painted to match your decor, though it is designed to match standard white plumbing fixtures out of the box.
Wipe it away immediately with a clean, dry cloth. Solvent weld cement is designed to melt the plastic, so leaving it on the surface will leave permanent marks or surface damage.
Ensure the pipe was fully cleaned and deburred before applying solvent; you may need to cut the pipe back and re-weld if the surface was contaminated.
Verify that the pipe is indeed 21.5mm and that there are no internal obstructions or burrs on the pipe edge preventing insertion.
To install this connector, ensure the pipe ends are cut square and deburred using a file or sandpaper. Apply an appropriate solvent weld cement to both the outer surface of the pipe and the inner surface of the fitting socket. Quickly push the pipe into the connector with a slight twisting motion to distribute the adhesive. Hold the connection in place for several seconds until the bond sets. Compatibility is restricted to 21.5mm overflow pipework; do not attempt to force it onto larger waste pipes. Periodically check the exterior of the connection for signs of moisture, which may indicate an improper weld or pipe movement.
