Ecomotive Gaskit - Permanent Solution

Ecomotive Gaskit is designed to provide a permanent seal. However, its longevity can depend on the severity of the original damage and overall engine operating conditions.

Yes, the suspended formula circulates throughout the cooling system, allowing it to reach and seal leaks wherever they occur.

Ecomotive Gaskit is most effective for minor to moderate gasket leaks, cracks, or warps. Severely blown head gaskets may require professional mechanical repair.

Refer to the product packaging for specific dosage instructions based on your vehicle's cooling system capacity.

If the cooling system is properly flushed before use, the risk of clogging is minimal. The product is designed to remain suspended and seal leaks, not to form blockages.

Monitor your coolant level and engine temperature. You can also use a UV light to detect the sealant in repaired areas, as it contains a special UV ink.

Yes, it is compatible with all types of antifreeze and both alloy and steel heads, making it suitable for a wide range of vehicles.

Ensure the cooling system was thoroughly flushed before application. Verify the leak is within the system's repairable range. Check that the engine was run for the full recommended duration to allow the product to circulate and seal.

The leak may be too severe for the Gaskit to seal, or there might be an additional underlying issue causing overheating. Check for other blockages or mechanical failures in the cooling system.

This could indicate residual debris from a poorly flushed system. A follow-up flush might be necessary. Monitor coolant condition closely.

The UV ink may not be visible on all surfaces or within deep cracks. Ensure you are using an appropriate UV light source in a dark environment and are inspecting the correct areas. The absence of visible ink does not necessarily mean the leak has not been sealed.