Best current price£35.48from Lights.co.uk
Shopping.co.uk recommended and popular offers
Lights.co.uk£35.48Visit shop Paulmann Smart Motion Sensor, White, Ip54, Plastic
Visit shop
B&Q£36.54Visit shop B&Q - 50133 Sensor Smart Home Zigbee 3.0 Indoor White
Visit shop2 offers from £35.48 - £36.54
View price history by clicking the chart icon.
This Paulmann Smart Home Zigbee 3.0 Motion Sensor is designed for users seeking automated and energy-efficient lighting control. Its key benefit is reliable motion detection with a wide range and angle, ensuring lights activate when needed for comfort and security, though custom routines require the smik gateway. Key features include a 180° detection angle, 8m range, twilight activation, app control, Zigbee 3.0 compatibility, and cable-free installation options.
| Colour | White |
|---|---|
| Model Part Number | 435960 |
| Brand | Paulmann |
While the sensor can function for basic motion detection and light switching with a compatible Zigbee hub, a Paulmann smik gateway is recommended for setting up custom routines and advanced control via the app.
The sensor is typically powered by standard AA or AAA batteries. Please refer to the product manual for the exact battery type and quantity.
Sensitivity adjustments may be available through the Paulmann Smik app or your connected smart home system's interface, depending on the integration.
The sensor has an IP54 rating, which means it is protected against dust and splashes. It is suitable for covered outdoor areas but not for direct exposure to heavy rain or harsh weather conditions.
To reset the sensor, you typically need to remove it from your Zigbee network via the app and then perform a factory reset on the device itself. Consult the product manual for specific reset instructions.
Battery life varies depending on usage frequency and environmental conditions, but typically lasts several months to over a year. The Paulmann Smik app may provide battery level indicators.
Ensure batteries are correctly installed and charged. Check that the detection angle and range are not obstructed. Verify that the sensor is paired with your Zigbee hub and the app shows it as online. Test in low-light conditions if the twilight sensor is active.
Confirm the sensor is properly paired with the lights or smart home system. Check the custom routine settings in the app or via the smik gateway for correct activation rules. Ensure the twilight sensor is calibrated appropriately for the ambient light conditions.
Verify that the sensor is within range of your Zigbee hub. Check the sensor's battery level. Try removing and re-adding the sensor to your Zigbee network through the app.
Adjust the sensitivity settings if available through the app or gateway. Check for environmental factors like heat sources or moving objects that might be near the sensor. Review and adjust the 'off delay' settings in your custom routines.
Setup: The sensor is battery-powered and comes with mounting plates for easy, cable-free installation on walls or in corners. Follow the included instructions to insert batteries and mount the sensor in your desired location. To integrate with your smart home system, ensure your Zigbee hub (like the smik gateway) is active and follow the pairing process outlined in the Paulmann Smik app or your hub's documentation.
Compatibility: This sensor uses Zigbee 3.0 protocol, making it compatible with most Zigbee-certified smart home hubs and gateways. It can be controlled via the Paulmann Smik app or integrated with voice assistants if your smart home system supports voice commands for Zigbee devices.
Care: To maintain optimal performance, gently wipe the sensor's surface with a dry or slightly damp, soft cloth. Avoid using abrasive cleaners or solvents, as they can damage the plastic housing. Ensure the battery compartment is clean and free of corrosion. Periodically check and replace batteries as indicated by the app or device notifications.
