Best current price£200.99from GhostBikes.com
Shopping.co.uk recommended and popular offers
GhostBikes.com£200.99Visit shop Moto Master Black 112177 - Flame Series Floating Brake Disc For Ktm Duke 690 2013-2019 - Front Left
Visit shop2 offers from £200.99 - £203.99
View price history by clicking the chart icon.
This guide is for KTM Duke 690 owners (2013-2019) seeking enhanced braking performance for the front left wheel. The Moto Master Flame Series Floating Brake Disc offers superior cooling and a smoother, more predictable braking feel, allowing for harder braking. A potential caveat is that this is a performance upgrade, and installation should be done by a qualified mechanic.
| Model Part Number | 17102360 |
|---|---|
| Brand | Moto Master |
No, this Moto Master Flame Series Floating Brake Disc is specifically designed and compatible only with the KTM Duke 690 model years 2013-2019 for the front left position.
While not strictly required, it is recommended to use high-quality brake pads, ideally those designed for performance use, to complement the capabilities of this disc. Consult with a professional mechanic for specific recommendations.
The bedding-in process usually involves a series of moderate stops from medium speeds, followed by cooling periods. The exact duration and procedure can vary; refer to specific brake pad manufacturer guidelines or consult a mechanic.
The 'Flame' design's primary benefit is enhanced cooling through increased surface area and airflow, which significantly reduces the risk of brake fade and maintains consistent braking performance under heavy use.
Professional installation is strongly recommended due to the critical safety aspect of the braking system. Incorrect installation can lead to reduced performance or failure.
Use a motorcycle-specific brake cleaner and a clean, lint-free cloth. Ensure the disc is completely dry before riding.
The lifespan depends on riding conditions, maintenance, and the type of brake pads used. Regular inspection for wear is recommended, and replacement should occur when the disc reaches its minimum thickness specification or shows signs of damage.
This could indicate air in the brake lines. Ensure the brake system was properly bled during installation. If the problem persists, seek professional inspection.
New discs may produce some noise during the bedding-in period. If noise persists or is severe after bedding-in, inspect for proper mounting, pad issues, or debris trapped between the pad and disc.
Ensure the disc and pads are clean and free from contamination. Verify that the brake pads have been properly bedded-in. Check brake fluid level and condition.
Warping can occur from extreme heat or improper installation. Inspect the disc for flatness. If warped, it requires replacement.
Compatibility:
Setup:
Care:
