Fibaro Dimmer Bypass 2 - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Fibaro Dimmer Bypass 2 (FGB-002) is for users of the Fibaro Dimmer 2 (FGD-212) who want to ensure stable and flicker-free lighting, especially with energy-efficient LED bulbs. Its key benefit is enabling dimmers to operate correctly with low-load light sources. A potential caveat is that it is exclusively compatible with the Fibaro Dimmer 2 (FGD-212). This accessory effectively reduces the minimum load requirement for the dimmer, preventing common issues like flickering or bulbs not turning on.
All features
| Colour | Black |
|---|---|
| Model Part Number | FGB-002 |
| Brand | Fibaro |
Extended Product Information
FAQs
What is the primary purpose of the Fibaro Dimmer Bypass 2?
Its primary purpose is to reduce the minimum load requirement for the Fibaro Dimmer 2 (FGD-212), enabling it to work correctly with low-power light sources like LEDs and prevent flickering.
Can I use the FGB-002 with any dimmer switch?
No, the FGB-002 is specifically designed and compatible only with the Fibaro Dimmer 2 (FGD-212).
What type of lights is this bypass most useful for?
It is most useful for energy-efficient light sources such as LED bulbs, which often have a low power consumption that can cause issues with standard dimmers.
How do I know if I need to install the bypass?
You likely need the bypass if your lights flicker, don't turn on, or dim unevenly when using the Fibaro Dimmer 2 (FGD-212) with LED or other low-power bulbs.
Is the bypass difficult to install?
Installation involves basic electrical wiring. If you are comfortable with electrical work and follow the provided diagrams carefully, it is straightforward. Always ensure power is disconnected before installation.
Does the bypass affect the maximum load of the dimmer?
The bypass is designed to address minimum load issues. The maximum load capacity of the Dimmer 2 (FGD-212) remains as specified by its manufacturer.
What is the physical color and design of the FGB-002?
The product color is black, and it features a built-in case design for installation within electrical boxes.
Troubleshooting
Lights flicker after installing Dimmer 2 without bypass.
Install the Fibaro Dimmer Bypass 2 (FGB-002) in parallel with the light source, following the wiring diagram.
Lights do not turn on or are very dim.
Ensure the bypass is correctly wired in parallel with the light source and that the Fibaro Dimmer 2 (FGD-212) is functioning properly.
Dimmer does not respond or behave erratically.
Verify that the bypass is compatible (FGB-002 for FGD-212) and that all connections are secure and correctly made according to the manual.
Pros and Cons
Pros
- Ensures stable lighting with low-load bulbs (e.g., LEDs).
- Prevents light flickering.
- Improves the reliability of the Fibaro Dimmer 2.
- Easy to install when following instructions.
- Compact and designed for built-in applications.
Cons
- Only compatible with Fibaro Dimmer 2 (FGD-212).
- Requires proper wiring to function correctly.
- Adds an extra component to the electrical circuit.
Setup, Compatibility & Care
Compatibility:
The Fibaro Dimmer Bypass 2 (FGB-002) is designed exclusively for use with the Fibaro Dimmer 2 (FGD-212). It is not compatible with other dimmer models or brands.
Setup:
- Safety First: Always disconnect power to the circuit at the breaker before beginning any electrical work.
- Access Wiring: Locate the Fibaro Dimmer 2 module in its installed location (typically within a wall box).
- Connect Bypass: Connect the Dimmer Bypass 2 wires in parallel with the light source, following the specific wiring diagram provided with the Dimmer 2 and the bypass. Typically, this involves connecting its two wires to the terminals where the light fixture is connected to the dimmer.
- Secure Connections: Ensure all wire connections are secure and properly insulated.
- Restore Power: Once wiring is complete and verified, restore power to the circuit.
Care:
The Fibaro Dimmer Bypass 2 is a passive device and requires no regular maintenance. Its care consists of ensuring it remains securely installed and that its connections do not loosen over time. If issues arise, re-checking the connections is the primary step. The product color is black and its case design is built-in.