Blooma Zinc-Plated Steel Tee Hinge - Silver

No, the fixings (screws) are not included with these Blooma tee hinges. You will need to supply your own appropriate screws for installation.

Yes, these hinges are suitable for both internal and external use, including interior doors if the design aesthetic and load requirements are met.

The zinc plating provides excellent resistance to rust and corrosion, significantly increasing the durability and lifespan of the hinges, especially when used outdoors.

You can clean the silver finish with a damp cloth. Avoid abrasive cleaners that could scratch the surface.

These hinges are specifically designed for use on sheds and gates, offering robust support for these types of structures.

The tee hinge design generally provides good support. However, for very heavy gates, ensure you use sufficient hinges and that the mounting points are very secure. It's always recommended to check the weight rating if available or use multiple hinges.

While they have a silver finish, you can paint them if desired. Ensure the surface is clean and dry, and use a primer suitable for metal before applying your chosen paint.

Clean the hinge pin and surrounding area. Apply a small amount of appropriate lubricant (e.g., WD-40 or a silicone-based lubricant) to the pin and work the hinge back and forth.

Ensure all screws are fully tightened. Check if the mounting surface is solid. If the issue persists, the hinge may be undersized for the weight, or the mounting point may be weak.

This can occur in very humid or coastal environments. Clean the rust spots with a wire brush and apply a protective coating like clear lacquer or rust-inhibiting paint.

Ensure you are using screws of the correct size and type for the material. Pre-drill pilot holes that are slightly smaller than the screw diameter. For softer wood, consider using wood filler or a longer screw.