Best current price£4.79from UK Office Direct
Shopping.co.uk recommended and popular offers
UK Office Direct£4.79Visit shop Q-Connect Spraymount Permanent Adhesive Aerosol 400Ml
Visit shop5 offers from £4.79 - £20.27
View price history by clicking the chart icon.
This guide is for users needing a reliable adhesive for permanent mounting of lightweight materials like film, acetate, and layout paper. Its key benefit is a transparent, non-wrinkling spray that ensures a clean, permanent bond. A key consideration is its shipping restriction to UK Mainland only and its classification as an extremely flammable aerosol. The Q-Connect Spraymount Adhesive provides a strong, lasting hold without damaging delicate materials.
| Model Part Number | KF11026 |
|---|---|
| Brand | Q-Connect |
This adhesive is suitable for lightweight materials such as film, acetate, layout paper, and photographs. It is designed to prevent soaking through or wrinkling these delicate items.
Yes, the adhesive creates a permanent bond once it is dry. It is not designed for repositioning.
While it may adhere to some fabrics or foam board, it is not specifically formulated for these materials and may not provide a durable or clean bond. It is best suited for paper, film, and acetate.
The adhesive dries quickly, becoming tacky within moments and forming a permanent bond as it fully cures. For best results, allow it to become tacky before joining surfaces.
No, this item has shipping restrictions and can only be sent within the UK Mainland. It cannot be sent to destinations over water.
Yes, it is an extremely flammable aerosol. Please follow all safety precautions, store away from heat and ignition sources, and ensure good ventilation during use.
Store the can in a cool, dry place away from direct sunlight and heat. Ensure it is kept away from any open flames or sparks. Always keep the cap on when not in use.
Turn the can upside down and spray for a few seconds to clear the nozzle. If blockage persists, carefully try to clean the nozzle with a solvent-soaked cloth (ensure the can is empty and safe to handle).
Ensure the can has been shaken thoroughly before use. Hold the can at a consistent distance and angle from the surface during application.
Ensure surfaces were clean and dry before application. Ensure sufficient adhesive was applied and materials were pressed together firmly. The adhesive needs adequate time to cure for permanent bonding.
Apply a thinner, more even coat of adhesive. Ensure the spray was held at the recommended distance. For very thin materials, consider applying only to one surface and allowing it to become tacky before carefully aligning and pressing.
Setup:
Compatibility:
Care:
