Best current price£31.87from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£31.87Visit shop Flexipads World Class Dual Action Sander Pad 150Mm Grip 5/16 Unf 5063750427683
Visit shop
Debenhams£36.00Visit shop Flexipads World Class Unisex Multicolor Dual Action Sander Pad 150Mm Grip 5 16 Unf
Visit shop2 offers from £31.87 - £36.00
View price history by clicking the chart icon.
This 150mm (6-inch) Dual Action Sander Pad from Flexipads World Class is designed for professionals and serious DIYers using dust extraction machines. Its key benefit is providing a stable and effective surface for abrasive discs, particularly Abranet and other 51-hole sanding sheets, ensuring efficient dust removal and a smooth finish. A potential caveat for some users might be the 5/16 UNF thread size, which needs to be compatible with their existing sander. The pad features a medium-density 12mm foam layer for optimal balance between conformity and support, and is built for durability with a maximum RPM of 10000.
| Model Part Number | 5063750427683 |
|---|---|
| Brand | Flexipads World Class |
The 51-hole design, particularly when used with Abranet discs, is engineered to maximize dust extraction efficiency by allowing abrasive grit particles and wood dust to be pulled through the abrasive and the pad directly into the vacuum system.
While the pad may physically attach, its dust extraction capabilities are optimized for 51-hole discs. Using discs with a different hole pattern will significantly reduce dust extraction effectiveness.
Medium density foam strikes a balance. It's firm enough to provide consistent sanding pressure and support, preventing excessive gouging, but also flexible enough to conform to moderate curves and edges for a smooth, uniform finish.
The pad is rated for a maximum operational speed of 10000 RPM. Always ensure your sander's speed setting does not exceed this limit.
Pad replacement depends on usage and care. Inspect the hook-and-loop surface for wear and the foam for excessive compression or damage. Typically, professional use may require replacement every few months to a year, while lighter DIY use can extend its life.
This pad is designed primarily for dry sanding applications with dust extraction. It is not recommended for wet sanding, as moisture can degrade the foam and hook-and-loop material.
Verify that your sander has a 5/16 UNF spindle thread. Ensure no debris is present in the sander's thread or the pad's attachment point. Hand-tighten firmly but do not force.
Clean the hook-and-loop surface of both the pad and the sanding disc. Ensure you are using a compatible 51-hole disc. Replace the pad if the hook-and-loop material is worn out.
Ensure the pad is correctly and securely attached to the sander. Check if the sander itself is functioning properly. Uneven wear on the pad or disc can also cause vibration.
Confirm you are using a 51-hole disc designed for dust extraction. Ensure the sander's dust port is clear and the vacuum hose is not blocked. The pad's hole pattern is optimized for this function.
Setup: To attach the pad, ensure your dual-action sander is disconnected from power. Screw the Flexipads World Class pad onto the sander's spindle, ensuring it is securely tightened to the 5/16 UNF thread. Do not overtighten.
Compatibility: This pad is designed for dual-action (orbital) sanders with a 5/16 UNF spindle thread. It is optimized for use with 150mm (6-inch) sanding discs featuring 51 holes, such as Abranet discs, to facilitate dust extraction.
Care: After each use, remove the sanding disc. Gently brush or blow away any dust and debris from the hook-and-loop surface of the pad. For deeper cleaning, a slightly damp cloth can be used, but avoid saturating the foam. Allow the pad to air dry completely before storing. Inspect the hook-and-loop material regularly for wear or damage.
