Maston Spray Paint - Black
Best current price£16.79from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£16.79Visit shop Maston Spray Paint 2K Two High Gloss Jet Black Ral9005 400Ml 6412490038700
Visit shopOnBuy.com£16.79Visit shop All Offers
2 offers from £16.79
View price history by clicking the chart icon.
OnBuy.comMaston Spray Paint 2K Two High Gloss Jet Black Ral9005 400Ml 6412490038700
Free delivery in 1–3 days
£16.79
Visit shop
Maston Spray Paint 2K Two High Gloss Jet Black Ral9005 400MlFree delivery in 1–3 days£16.79Visit shop →
Product Information
Full details
The Maston 2K Two-Component Spray Paint is designed for DIY enthusiasts and professionals seeking a high-performance, industrial-strength coating for automotive, metal, or mechanical surfaces. Its primary benefit is the creation of a permanent, chemical-resistant, and airtight finish that rivals factory-applied paint, though it requires precise timing during application due to its two-component activation system.
All features
| Colour | Black |
|---|---|
| Model Part Number | 20009005-EU |
| Brand | Maston |
Extended Product Information
FAQs
Can I store the can after activation?
No, once the two components are mixed, the chemical reaction is irreversible and the contents will harden inside the can over time.
Is this paint suitable for plastic parts?
While it adheres well to metal, always use a plastic adhesion promoter first if you intend to spray plastic components.
Does this paint require a clear coat?
Because it is a high-gloss 2K formula, a clear coat is generally not required for protection, but it can be applied if desired for extra depth.
How long should I wait between coats?
Wait approximately 5 to 10 minutes between light coats to allow for proper solvent evaporation.
Can I use this on engine parts?
Yes, its heat and chemical resistance make it an excellent choice for engine bays, provided the surface does not exceed the temperature rating of the paint.
Troubleshooting
The paint is not curing properly after 24 hours.
Ensure the hardener was fully activated at the base of the can and that the ambient temperature is not too low.
Spray nozzle is sputtering or clogging.
Clear the nozzle by spraying it upside down or replacing it if paint has already hardened in the tip.
Paint finish appears orange-peeled or rough.
Increase the distance from the object by 5-10cm and ensure coats are applied with a consistent, sweeping motion.
Pros and Cons
Pros
- Extremely durable finish compared to standard aerosol paints
- High resistance to chemicals, fuel, and weather conditions
- Professional-grade gloss and depth
- Provides an airtight seal against oxidation
Cons
- Limited pot life once the hardener is activated
- Requires careful preparation of surfaces to ensure adhesion
- More complex application process than standard spray paints
Setup, Compatibility & Care
To begin, activate the hardener by removing the pin located at the base of the can, then shake the container vigorously for at least two minutes. Once activated, the paint must be used within its specified pot life, typically 24 to 48 hours depending on ambient temperature. Ensure the ambient temperature is between 15-25 degrees Celsius for optimal curing. Clean the nozzle immediately after use by turning the can upside down and spraying until only clear propellant emerges to prevent clogging. Always wear protective gear, including a mask and gloves, as 2K formulations contain isocyanates which require proper ventilation during application.