Blum 110 Degree Soft-Close Half-Overlay Hinge With 173L6100 Mounting Plate - 2-Pack

Half-overlay refers to cabinet doors that cover approximately half of the cabinet frame's face. These hinges are specifically designed for this type of installation.

The hinge cup requires a 35mm drill bit. This is a standard size for most cabinet hinges.

The included 173L6100 mounting plates are designed for 18mm thick cabinets with a 0mm adjustment. Different mounting plates are available for other cabinet thicknesses or overlay types.

No, the integrated soft-close mechanism on this specific hinge model is not adjustable. It provides a consistent, gentle closing action.

The clip-top mechanism allows you to simply pull the hinge arm away from the mounting plate to detach the door. Reattachment is done by pushing the hinge back onto the plate until it clicks.

Blum products typically come with a long-term warranty, often lifetime. Specific warranty details should be confirmed with the retailer or Blum directly.

These hinges are designed for standard inward-opening cabinet doors. For outward-opening doors, different hinge types would be required.

Ensure the soft-close mechanism is not obstructed. Verify the hinge is fully clipped onto the mounting plate. Check if the door is too heavy for the hinge's soft-close capacity.

Use the adjustment screws on the hinge to correct the door's position vertically, horizontally, and in depth. Consult the Blum adjustment guide for detailed instructions.

Ensure the mounting plate is correctly installed and aligned with the hinge arm. Check for any obstructions on the plate or hinge. The plate may need to be repositioned slightly.

Check for proper door support and ensure all hinges are securely fastened. Verify the cabinet frame is square. Adjust hinges to compensate for minor frame imperfections.