Tikkurila Presto Pikasilote - White - 0.25 Litres
Best current price£13.34from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£13.34Visit shop B&Q - Presto Rapid FillerQuick Drying Latex Filler0.25 Litres
Visit shopB&Q£13.34Visit shop One Offer
1 offer from £13.34
View price history by clicking the chart icon.
B&QB&Q - Presto Rapid FillerQuick Drying Latex Filler0.25 Litres
Free delivery in 1–3 days
£13.34
Visit shop
Product Information
Full details
The Tikkurila Presto Pikasilote is a quick-drying, water-based latex filler designed for DIY enthusiasts and painters needing to quickly repair small imperfections on interior surfaces. Its primary benefit is its fast drying time and excellent adhesion to various substrates before painting, making it ideal for immediate next-step finishing. A minor caveat is its suitability for dry rooms only, limiting its use in high-moisture areas.
All features
| Colour | White |
|---|---|
| Brand | Tikkurila |
Extended Product Information
FAQs
How long does Tikkurila Presto Pikasilote take to dry?
Drying time varies depending on layer thickness and environmental conditions (temperature, humidity), but it is designed for quick drying, often within an hour, allowing for subsequent painting.
Can I use this filler in a bathroom or kitchen?
No, this product is specifically for dry rooms. It is not formulated for high-moisture environments like bathrooms or kitchens.
What surfaces can I use this filler on?
It is suitable for new and previously painted wooden, chipboard, Woodfibreboard, rendered, and filler surfaces.
What type of paint can I use over the filler?
The filler can be painted over with both latex and alkyd paints.
How do I clean up tools after using this filler?
Clean your tools immediately after use with water.
Is this filler suitable for large holes?
Tikkurila Presto Pikasilote is intended for filling scratches and partial levelling of small surfaces. For larger holes, a different type of filler may be more appropriate.
What does M1 approved mean?
M1 approval indicates that the product meets strict standards for low emissions of volatile organic compounds (VOCs), contributing to better indoor air quality.
Troubleshooting
Filler shrinks excessively after drying
Apply filler in multiple thin layers rather than one thick layer. Ensure the surface is properly prepared and not overly porous.
Filler cracks during drying
This usually indicates the layer was applied too thickly. Remove the cracked filler and reapply in thinner layers.
Difficulty sanding the filler
Allow the filler to dry completely before attempting to sand. Use fine-grit sandpaper for a smooth finish.
Paint does not adhere well to the filler
Ensure the filler is fully dry and free from dust before painting. Lightly sand the dried filler surface before applying primer or paint.
Pros and Cons
Pros
- Fast drying time reduces project duration.
- Water-based for easy cleanup.
- Low VOC emissions (M1 approved).
- Good adhesion to common interior building materials.
- Can be painted over with common paint types.
Cons
- Only suitable for dry rooms.
- Designed for small surface repairs, not large-scale filling.
- 0.25 Litre size is limited for extensive projects.
Setup, Compatibility & Care
Setup: Ensure the surface to be filled is clean, dry, and free from dust or loose material. For best adhesion, lightly sand any glossy surfaces. Open the container and apply the filler directly to the defect using a suitable filling knife or spatula. Smooth the filler to match the surrounding surface.
Compatibility: Tikkurila Presto Pikasilote is compatible with new and previously painted wooden, chipboard, Woodfibreboard, rendered, and filler surfaces. It can be overpainted with latex and alkyd paints.
Care: Store the filler in its original, tightly sealed container in a cool, dry place, away from direct sunlight and frost. Unused filler should be kept sealed to prevent drying out. Clean tools immediately after use with water.