Best current price£5.40from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£5.40Visit shop Polypipe 50mm Soil Solvent Boss Adaptor for ABS and MUPVC Systems in Black SW82B
Visit shop1 offer from £5.40
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts working on residential soil and vent systems. The Polypipe Soil Solvent Boss Adaptor provides a secure, leak-resistant connection for waste pipes, ensuring efficient flow and proper ventilation. A key caveat is the requirement for solvent cement, meaning a controlled environment is needed for installation.
| Model Part Number | SW82B |
|---|---|
| Brand | Polypipe |
The boss adaptor creates a secure connection point within a soil and waste pipe system, facilitating the joining of pipes and allowing for efficient waste flow and air discharge.
It is compatible with ABS and MUPVC pipes of 50mm diameter.
It is installed using solvent cement, which creates a permanent solvent weld joint between the adaptor and the pipe.
This product is designed for soil and waste systems carrying cold wastewater and foul air. It is not intended for hot water applications.
A 'boss adaptor' typically refers to a fitting that allows a branch pipe to connect to a main pipe, or provides an outlet on a main run.
The diameter of this adaptor is 50mm.
Captive seal technology enhances the joint's resistance to leaks, ensuring a more reliable and secure connection for waste and foul air.
Ensure surfaces were clean, dry, and properly prepared before applying solvent cement. Check for cracks in the adaptor or pipe. Re-cut pipe and re-joint if necessary, following solvent cement instructions precisely.
Verify that both the pipe and adaptor are the correct size (50mm). Ensure there are no obstructions or burrs inside the adaptor socket or on the pipe end. Clean the surfaces thoroughly.
Confirm that the correct type of solvent cement for PVC-U/ABS is being used and that it is within its expiry date. Ensure adequate ventilation during application, but avoid excessive drafts which can cause the cement to dry too quickly.
Setup: The adaptor is designed for solvent weld jointing. Ensure both the pipe end and the inside of the adaptor socket are clean and dry. Apply solvent cement evenly to both surfaces and immediately push the pipe into the socket with a slight twisting motion until it bottoms out. Hold firmly for 30 seconds to prevent push-out. Allow adequate curing time as per the solvent cement manufacturer's instructions before applying pressure or testing.
Compatibility: This adaptor is specifically designed for use with PolySoil® range components. It is compatible with ABS (Acrylonitrile Butadiene Styrene) and MUPVC (Modified Polyvinyl Chloride) pipes of 50mm diameter.
Care: As this is part of a permanent drainage system, ongoing care is minimal. Ensure the external drainage system is clear of debris. If access is possible, occasional flushing can help maintain optimal flow. Avoid using harsh chemical drain cleaners that could degrade the PVC-U over extended periods.
Polypipe Soil and Vent Adaptor - Black 40mm SW81BFrom £5
Hasselblad X-V Lens AdapterFrom £214
Polypipe Soil Solvent Boss Adaptor - 40mm - WhiteFrom £5
Skarper eBike Drive System - BlackFrom £1495
DT Swiss Ratchet Freehub Conversion Kit - SRAM XD - 142/148mmFrom £30
Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR - NikonFrom £295
POLYPIPE BUILDING PRODUCTS 110mm Solvent Grey Bend - SWB47SGFrom £19
Wirquin Slim+ Shower Waste - BlackFrom £47
FloPlast Waste Pipe Coupling - 32mmFrom £2
eufy - Bullet PoE Cam E40 - attributes: brand:eufyFrom £79
Polypipe Waste Solvent Weld Reducer - 50mm x 40mm - WhiteFrom £7
Polypipe 110mm Soil Single Socket Coupling GreyFrom £11