Best current price£2.77from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£2.77Visit shop Faithfull Sds Plus Chuck Adaptor Sds To 1/2In Unf
Visit shop
B&Q£6.19Visit shop - Faithfull Sds Plus Chuck Adaptor Sds To 1/2In Unf Faichucksdsa
Visit shop11 offers from £2.77 - £8.90
View price history by clicking the chart icon.
The Faithfull SDS Plus Chuck Adaptor is designed for tradespeople and DIY enthusiasts who need to utilize standard straight-shank drill bits with their SDS or SDS Plus power tools. By converting an SDS connection to a 1/2in - 20UNF thread, this adapter provides crucial versatility on the job site; however, it is essential to remember that this attachment is strictly for rotary drilling and must never be used while the hammer action is engaged.
| Model Part Number | FAICHUCKSDSA |
|---|---|
| Brand | Faithfull |
No, this adaptor must not be used in hammer mode as it could cause damage to the adaptor and the attached chuck.
It is designed for standard SDS and SDS Plus machines.
The thread size is 1/2in - 20UNF.
No, this is an adaptor only; you must use an existing drill chuck.
While it allows for rotary drilling, SDS tools are primarily designed for masonry. Use it for light-to-medium tasks.
Ensure the chuck is fully threaded onto the adaptor and the SDS shank is properly locked into the drill.
Check the SDS chuck release mechanism for debris and ensure the tool is not under load while attempting to remove.
This is likely a fault of the attached chuck itself; tighten the chuck key fully or inspect the chuck jaws for wear.
To set up the adaptor, insert the SDS end into your tool's bit holder as you would a standard drill bit. Thread your chosen 1/2in - 20UNF drill chuck onto the threaded end of the adaptor until it is tight and secure. To ensure longevity, keep the SDS shank clean and lightly lubricated with grease. Always verify that your power tool is switched to rotary-only mode before starting work. If the chuck becomes loose during use, detach it and ensure the threads are clear of debris before reseating. Store the adaptor in a dry, rust-free environment when not in use.
