DeWalt Extreme Masonry Drill Bit - 8 x 120mm

This drill bit is designed for masonry, stone, brick, tiles, and concrete.

No, this bit is not compatible with SDS systems. It is designed for use with rotary and percussion drills.

Clean the bit after each use, avoid excessive force, and store it in a dry place.

The anti-slip shank helps prevent the bit from slipping in the drill chuck, ensuring secure and accurate drilling.

Select the bit size that matches the size of the anchors, plugs, or holes you need to create.

Use lower speeds for harder materials and higher speeds for softer materials. Always start at a slower speed to prevent the bit from slipping.

Apply consistent, firm pressure. Avoid forcing the bit. Let the drill do the work.

You can find additional specifications on the product packaging and online retailers' websites.

Check the drill's settings, ensure it is in the correct mode (percussion for masonry). Check for bit wear and replace if necessary.

Reduce pressure and drill at a consistent speed. Ensure the bit is not being forced. Check the material for any hidden obstructions.

Reverse the drill to remove the bit. Clear the hole of debris. Make sure you are using the correct bit for the material.

Tighten the chuck securely. Check the bit shank for damage and replace if necessary.