Best current price£110.89from eBay
Shopping.co.uk recommended and popular offers
eBay£110.89Visit shop Schneider iCT50-25-22-230 Modular Contactor 25A 2NO+2NC 220/240 VAC A9C20838
Visit shop3 offers from £110.89 - £140.52
View price history by clicking the chart icon.
The Schneider Electric Acti 9 iCT Contactor (A9C20838) is an essential component for electrical professionals and facility managers looking to manage power circuits reliably within residential or commercial distribution boards. This 25A 4-pole modular contactor excels at controlling high-demand loads like lighting and heating systems, offering the versatility of 2 Normally Open (NO) and 2 Normally Closed (NC) contacts. While its robust design provides long-term dependability in varied environments, users should note that as a 230-240V AC device, it requires careful circuit planning and professional electrical knowledge for safe installation.
| Series | iCT |
|---|---|
| Model Part Number | A9C20838 |
| Brand | Schneider Electric |
It is not IP-rated for outdoor exposure and must be installed within a suitable weather-proof electrical enclosure.
The Normally Closed (NC) contacts are typically used for fail-safe applications where the circuit must remain closed until the contactor is energized.
Yes, it is designed for standard DIN rail mounting found in most modern residential and commercial distribution boards.
Operating outside the specified range may lead to premature component degradation or failure; ensure adequate ventilation in the distribution cabinet.
This specific iCT model is intended for automatic control via the electrical signal to the coil rather than manual switching.
Verify the control circuit voltage is consistently between 230-240V AC and check for loose control wiring connections.
Inspect terminal screws for proper tightness and ensure the connected load does not exceed the rated 25A capacity.
Use a multimeter to verify continuity across the contacts and ensure the control coil is receiving the correct voltage signal.
Installation must be performed by a qualified electrician in accordance with local electrical regulations. Mount the device onto a standard symmetrical DIN rail. Ensure all terminal connections are tightened to the recommended torque specifications to prevent overheating. When wiring the contacts, double-check the NO and NC labels to ensure your circuit logic operates as intended. Maintenance involves periodic inspections for loose terminal screws and checking for any debris or moisture inside the distribution board. The device does not require lubrication and should be kept in a dry, ventilated environment.
