Displaypro Kick Plate Brushed Stainless Steel Door Protection - Stainless Steel Countersunk Screw Fitting, 950 X 200Mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Displaypro Kick Plate is designed for anyone needing to protect the lower area of a door from scuffs, kicks, and general wear. Its key benefit is providing durable protection with a clean, brushed stainless steel aesthetic. A potential caveat is the need to choose between self-adhesive or screw-fixing methods based on your installation requirements. This product offers robust door protection, available in various sizes and fixing options, made from high-quality brushed stainless steel.
All features
| Colour | Silver |
|---|---|
| Brand | Displaypro |
Extended Product Information
FAQs
What material is the kick plate made from?
The kick plate is made from high-quality brushed stainless steel.
What are the two fitting options available?
It is available in a self-adhesive option and a countersunk screw-fitting option.
Can I use the self-adhesive version on a wooden door?
Yes, if the wooden door surface is smooth, clean, and dry. For heavily textured or unfinished wood, the screw-fitting option might be more secure.
Does the screw-fitting version come with screws?
Typically, screws are not included as the type and length required can vary depending on the door material and thickness. Please check the product packaging or retailer listing for specifics.
How do I clean the brushed stainless steel finish?
Use a soft, damp cloth with a mild detergent. Avoid abrasive cleaners. Wipe dry afterwards.
What does 'countersunk' mean for the screw fitting?
Countersunk means the screw heads are designed to sit flush with or below the surface of the kick plate, providing a neat finish and preventing obstruction.
Are there other sizes available?
Yes, Displaypro offers this kick plate in a variety of sizes and dimensions, as well as different sibling products within the range.
Troubleshooting
Self-adhesive plate not sticking well
Ensure the door surface is thoroughly cleaned, dried, and free of any dust or grease. Reapply pressure firmly. For best results, avoid exposing the adhesive to moisture for the first 24-48 hours.
Screw holes not aligning
Double-check the placement of the kick plate before marking. If holes are drilled, you may need to use a larger washer or slightly adjust the plate's position if feasible.
Plate arrived damaged or scratched
Inspect the product upon arrival. If damaged, contact the retailer immediately for a replacement or return.
Difficulty finding suitable screws for screw-fitting
Check product documentation or retailer information for recommended screw types and lengths. For most standard wooden doors, wood screws of appropriate length are suitable.
Pros and Cons
Pros
- Provides excellent protection against door damage.
- Made from durable, high-quality brushed stainless steel.
- Available in multiple sizes and two fixing methods (self-adhesive and screw-fixed).
- Adds a professional and clean aesthetic to doors.
- Manufactured in the UK.
Cons
- Requires careful selection of the correct fixing method for the intended surface.
- Screw-fixing method may require drilling into the door.
- Self-adhesive option might not be suitable for heavily textured or uneven surfaces.
- The specific dimensions of this model (950 x 200mm) may not fit all door applications.
Setup, Compatibility & Care
Setup:
- Self-Adhesive Fitting: Ensure the door surface is clean, dry, and free from grease. Peel off the backing film and carefully apply the plate, pressing firmly from the center outwards to ensure good adhesion.
- Countersunk Screw Fitting: Position the kick plate on the door at the desired height. Mark the screw hole locations. Pre-drill pilot holes if necessary. Secure the plate using appropriate screws (not always included). Always ensure screws are countersunk to sit flush with the plate.
Compatibility:
- Suitable for most standard interior and exterior doors.
- Self-adhesive version works best on smooth, non-porous surfaces.
- Screw-fitting version is suitable for most door materials, provided you use appropriate fixings.
Care:
- Clean with a soft, damp cloth and mild detergent.
- Avoid abrasive cleaners or scouring pads, which can scratch the stainless steel surface.
- Wipe dry with a clean cloth to prevent water spots.