Versatile, cold applied petrolatum (wax & mineral) bases corrosion control, waterproofing and seal...Versatile, cold applied petrolatum (wax & mineral) bases corrosion control, waterproofing and sealing tapes. Supplied in easy to use rolls, It is manufactured from a polyester fabric carrier coated and fully impregnated with a homogeneous blend of petrolatum and inert mineral fillers. The tapes are resistant to mineral acids, alkalis, and salts and bacterial attack and remain flexible and highly impermeable to water vapour. Conforms to NACE RP0375 (2006)
This guide is for users of Ultratape Petro Tape, a corrosion control and waterproofing tape. The primary benefit is long-lasting protection against corrosion and water damage. Keep in mind that proper surface preparation is crucial for optimal performance.
All features
Model Part Number
08247510UL
Brand
Ultratape
Extended Product Information
FAQs
What is Ultratape Petro Tape used for?
It is primarily used for corrosion control, waterproofing, and sealing applications on metal surfaces, especially in harsh environments.
What materials is the tape resistant to?
It is resistant to mineral acids, alkalis, salts, and bacterial attack.
How do I prepare the surface before applying the tape?
Clean the surface thoroughly to remove any dirt, rust, oil, or contaminants. Make sure the surface is dry.
Does this tape need a primer?
A primer might be needed, especially on some surfaces, to improve adhesion. Check the specific application guidelines.
What is the recommended overlap when applying the tape?
Overlap the tape by at least 25mm to ensure a proper seal.
What is the shelf life of Ultratape Petro Tape?
Shelf life can vary. Store in a cool, dry place away from direct sunlight.
Can this tape be used in high-temperature environments?
The tape has temperature limitations. Refer to product specifications for details.
Troubleshooting
Tape is not adhering properly.
Ensure the surface is clean, dry, and free from contaminants. Use a primer if necessary. Ensure sufficient overlap.
Tape is tearing during application.
Handle the tape carefully, avoid stretching it excessively. Ensure the surface is free of sharp edges.
Tape is lifting or peeling after application.
Make sure the tape is applied with firm pressure. Check for any contaminants on the surface. Ensure the application temperature is within the recommended range.
Pros and Cons
Pros
Provides long-lasting corrosion protection.
Offers excellent waterproofing capabilities.
Resistant to various chemicals and environmental factors.
Easy to apply due to the roll format.
Flexible and adaptable to various surface shapes.
Conforms to industry standards for quality.
Cons
Requires proper surface preparation for optimal performance.
May not be suitable for extremely high-temperature applications.
Can be messy if not handled carefully during application.
May require additional products for complex applications.
Specific application instructions are required.
Setup, Compatibility & Care
Surface Preparation:
Clean the surface thoroughly to remove dirt, rust, oil, and any other contaminants.
Ensure the surface is dry before application.
Consider using a primer for enhanced adhesion on some surfaces.
Application:
Cut the tape to the desired length.
Remove the backing (if applicable) and apply the tape, ensuring an overlap of at least 25mm.
Press the tape firmly onto the surface, smoothing out any air bubbles.
Compatibility:
Compatible with a wide range of materials, including steel, iron, and various coatings.
Always test compatibility on a small, inconspicuous area if unsure.