Brake Shoes Set - Quinton Hazell - BS920K1

The BS920K1 is typically sold as a set for a specific axle, but always check the packaging content to confirm if it covers both left and right sides.

If you have experience with drum brake hardware and hydraulic systems, you can, but professional installation is recommended due to the safety-critical nature of brakes.

This matches the hydraulic displacement of the system, ensuring the brake pedal feel remains consistent with your vehicle's factory specifications.

Yes, apply a small amount of high-temperature brake grease to the contact points where the shoes meet the backplate, being very careful not to get any on the friction surface.

You can measure the inner diameter of your existing brake drum using a brake drum gauge or a large vernier caliper.

Air is likely trapped in the system. Perform a complete brake system bleed according to the manufacturer's manual.

Check that the automatic adjuster is not over-tightening. Ensure all return springs are properly hooked and seated.

Verify that the brake drums are not worn past their service limit and that the shoes are properly centered.