Kenable Instrument Cable - XLR 3 Pin Plug to 6.35mm Mono Jack Plug Cable - 1M

This cable is ideal for connecting unbalanced mono microphones or line-level audio sources to equipment with 6.35mm mono jack inputs, such as mixers or amplifiers.

No, this is a mono cable designed for unbalanced mono signals only. It cannot transmit stereo audio.

This cable is designed for unbalanced signals and is generally not used with phantom power, which typically requires balanced connections. Check your audio equipment's specifications.

Unbalanced signals use two conductors (signal and ground) and are more susceptible to interference over longer distances compared to balanced signals.

Gently wipe the metal connectors with a dry, lint-free cloth. Avoid using liquids or abrasive cleaners.

Please refer to the retailer or manufacturer's website for specific warranty information, as this can vary.

No, this cable converts an XLR (often used for balanced signals) to a 6.35mm mono jack (typically unbalanced). It does not maintain a balanced signal path.

Ensure both ends of the cable are securely plugged into the correct ports. Check that the microphone or audio source is powered on and configured correctly. Test with a different cable to rule out a faulty connection.

Verify that the cable is being used for an unbalanced signal and that the receiving device is set to mono input. Try repositioning the cable away from power cables or other electronic devices that might cause interference. Ensure connectors are clean.

This may indicate an internal wire break or loose connection within the connector. Check the strain relief for damage. If the issue persists, the cable may need replacement.