Audio Cable - Black

This cable is designed for balanced mono audio signals, commonly used for microphones.

No, this cable is intended for analog audio signals and is not designed for digital audio transmission.

Gently wipe the connectors with a dry, lint-free cloth. Avoid using liquids or solvents, which could damage the contacts.

It means the cable contains two insulated conductors (cores) plus a braided or foil shield around them. This shielding helps to block out electromagnetic interference, preventing hum and noise.

This cable is not designed for speaker-level signals, which require heavier gauge wiring. It is intended for microphone-level signals.

Please refer to the retailer or kenable's official website for specific warranty information, as warranty periods can vary.

Check that both XLR connectors are fully seated in their respective sockets. Inspect the cable for any visible damage. Test with a different known-good cable and microphone/device to isolate the issue.

Ensure the cable's shielding is intact and not damaged. Verify that the audio equipment is properly grounded. Try using the cable in a different location to rule out electrical interference from power sources.

This cable is designed for mono signals. If experiencing issues with a specific setup, ensure your equipment is configured for mono input/output as appropriate.