Apico Universal Handlebar Conversion Kit - 22.2mm To 28.6mm

The kit allows you to mount larger diameter 28.6mm (1 1/8") Fat Bars onto motorcycles that originally came with smaller 22.2mm (7/8") handlebars.

This kit is specifically designed to allow the use of 28.6mm (1 1/8") diameter handlebars, commonly referred to as 'Fat Bars'.

The clamps are designed to mount most popular brands of oversize handlebars. It's always recommended to confirm the clamp diameter compatibility of your chosen handlebars.

You will typically need a socket set or wrench set with appropriate sizes for the mounting hardware, and a torque wrench for proper tightening.

While the primary function is to allow for larger handlebars, the choice of Fat Bars themselves will determine any significant change in riding position. This kit only provides the means to mount them.

No, this is a conversion kit for mounting handlebars. The handlebars themselves are sold separately.

Clean the clamps with a soft cloth and mild soap and water. Dry thoroughly. Avoid abrasive cleaners that could scratch the finish.

Ensure all clamp bolts are tightened evenly and to the correct torque specifications. Check that the handlebar is centered within the clamps and not binding.

Verify that your motorcycle's triple clamps are designed for 22.2mm stems and that the mounting bolt pattern of the Apico kit matches your triple clamp's holes. Some adjustments or specific adapters may be needed for non-standard setups.

Ensure you are using 28.6mm handlebars, as controls designed for 22.2mm bars will not fit. Some aftermarket controls may require minor adjustments for optimal fit.