Best current price£19.40from eBay
Shopping.co.uk recommended and popular offers
eBay£19.40Visit shop Mortar Pointing & Grouting Gun Tile Caulking Brick Wall Floor Cement Patio Slab
Visit shop1 offer from £19.40
View price history by clicking the chart icon.
This AB Tools Mortar Pointing And Grouting Gun (AN555) is designed for DIY enthusiasts and tradespeople tackling masonry and tiling projects. Its primary benefit is simplifying the application of mortar and grout into confined spaces, such as wall re-pointing or tile grouting, reducing mess and improving accuracy. A potential caveat is the manual operation, which requires consistent pressure for even application.
| Model Part Number | AN555 |
|---|---|
| Brand | AB Tools |
This gun is designed for standard mortar mixes and tile grouts. Ensure the material consistency is appropriate for application through a nozzle, not too wet and not too dry.
Unscrew the front cap of the gun. Carefully pull off the currently attached nozzle and slide on the desired nozzle. Replace and tighten the front cap securely.
The angled nozzle is useful for reaching awkward spots or for applying mortar or grout at a specific angle, such as along baseboards or in tight corners.
You can load the gun by removing the plunger and filling the cylinder with your material, often using the provided scoop. Ensure the material is packed reasonably well to avoid air gaps.
This tool is best suited for detailed work, repairs, and smaller to medium-sized projects where precision is required. For very large areas, manual application can be time-consuming.
The gun should be cleaned thoroughly immediately after each use to prevent the material from drying and causing blockages. Regular cleaning ensures optimal performance and longevity.
Regular cleaning is the primary maintenance. Ensure the plunger and cylinder are free of debris. Periodically check the ratchet mechanism for smooth operation.
Check if the material is too dry or has started to harden. Ensure the plunger is seated correctly and the nozzle is not blocked. Clean the nozzle and cylinder.
Ensure the material consistency is correct. Apply steady, consistent pressure to the handle. Check for air pockets in the material load.
Remove the nozzle and clean it thoroughly with water and a brush. Use a thin wire or pin to clear any hardened material. Ensure the cylinder and plunger are also clean.
Check the ratchet mechanism for debris. Apply a small amount of lubricant suitable for tools if necessary. Ensure all parts are properly assembled.
Setup: Ensure the gun is clean before first use. Select the appropriate nozzle for your task. Load the material (mortar or grout) into the cylinder using the provided scoop or by other suitable means, ensuring not to overfill. Attach the desired nozzle securely.
Compatibility: This gun is compatible with standard mortar and tile grout mixes. For best results, use materials with a consistency recommended by the material manufacturer. Avoid using with harsh chemicals or solvents not intended for this type of applicator.
Care: After each use, thoroughly clean the cylinder, plunger, and nozzle with water or appropriate cleaning agents depending on the material used. Remove the plunger and clean the rod. Allow all parts to dry completely before reassembly or storage. Failure to clean properly can lead to material hardening and blockages, potentially damaging the tool.
