Plumbright Equal Elbow - 10mm
Best current price£2.26from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£2.26Visit shop Plumbright White 10Mm Equal Elbow Plastic Spe6711m
Visit shopCity Plumbing GB£2.26Visit shop One Offer
1 offer from £2.26
View price history by clicking the chart icon.
City Plumbing GBPlumbright White 10Mm Equal Elbow Plastic Spe6711m
Free delivery in 1–3 days
£2.26
Visit shop
Product Information
Full details
The Plumbright Equal Elbow 10mm is designed for professional plumbers, contractors, and DIY enthusiasts who need a reliable, solder-free solution for creating 90-degree turns in microbore pipework. This white push-fit fitting offers rapid installation and long-term durability in heating and water systems; however, users should ensure they are using the correct pipe insert (where required by pipe manufacturer specifications) to maintain the integrity of the push-fit seal.
All features
| Model Part Number | Spe6711M |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
Is this fitting reusable?
While the fitting can be removed using an appropriate release tool, it is generally recommended to use a new fitting when re-making a joint to ensure the integrity of the internal seal.
Can I use this with copper pipe?
Plumbright push-fit fittings are generally designed for plastic pipe systems. If using with copper, ensure the pipe is specifically compatible with push-fit seals and is free of surface imperfections.
Does it need a pipe insert?
Always follow the specific instructions of the pipe manufacturer. When using plastic pipe, a stiffener or insert is usually required to ensure the pipe remains round inside the push-fit connector.
Is this safe for drinking water?
Yes, as the product is WRAS approved, it is suitable for use in potable water systems in addition to heating systems.
What is the maximum temperature rating?
The product is designed to operate within standard domestic heating temperature and pressure ranges; please consult the technical data sheet for specific PSI and thermal limits.
Troubleshooting
Joint leaks immediately after installation
Remove the pipe and inspect the end for scratches or burrs. Re-cut the pipe end to ensure it is square and smooth before re-inserting.
Difficulty inserting pipe into fitting
Ensure the pipe is not ovalized. Use a pipe rounding tool if necessary and confirm the fitting is clear of debris.
Pros and Cons
Pros
- Significantly faster installation than soldering
- No open flames or specialized welding tools required
- Certified for UK safety standards via WRAS and KITEMARK
- Excellent durability against high pressures and temperatures
- Clean, professional-looking finish suitable for exposed piping
Cons
- Requires proper deburring of pipe ends to prevent seal damage
- Not suitable for use with certain non-standard pipe materials
- Should not be reused after removal for maximum safety
Setup, Compatibility & Care
To ensure a leak-free installation, the pipe end must be cut cleanly and squarely, ensuring there are no burrs or sharp edges that could damage the internal O-ring seal.
- Cut the 10mm pipe to the required length using a proper plastic pipe cutter.
- Ensure the end of the pipe is smooth and free from any surface damage or grit.
- Push the pipe firmly into the elbow until you feel the pipe seat against the internal stop.
- Apply a slight pull-back force to the pipe to confirm the 'grab ring' has engaged and the fitting is locked.
Regarding care, always ensure that the pipe is fully supported to prevent excessive mechanical strain on the joint. While the system is highly durable, it should not be used as a structural support for other heavy objects. If you need to remove the fitting, use the appropriate release tool to ensure the pipe and fitting surfaces remain undamaged.