Best current price£12.70from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.70Visit shop B&Q - Ridgeline Tap Connector15mm Copper Compression X 1/2" Bsp Female300mmFc-Cc15-12-300
Visit shop4 offers from £12.70 - £15.00
View price history by clicking the chart icon.
The Ridgeline Tap Connector (FC-CC15-12-300) is designed for plumbers and DIY enthusiasts looking for a reliable, leak-free method to connect standard 15mm copper pipework to 1/2" BSP plumbing fixtures. It provides the key benefit of a tool-tight installation that eliminates the need for soldering or hazardous open flames, making it ideal for tight spaces where maneuverability is limited, though it is specifically intended for standard household and light-commercial water pressures and should not be used in high-pressure steam systems.
| Model Part Number | FC-CC15-12-300 |
|---|---|
| Brand | Unvented Components Europe |
This model is specifically designed for copper pipe. Using it with plastic pipe requires an appropriate pipe insert to prevent the pipe from collapsing under compression.
No, compression fittings create a seal through the olive. PTFE tape is not required and may interfere with the seal.
It is intended for hot and cold domestic water systems. Consult a professional for specific high-temperature heating circuit compatibility.
It is designed for standard UK domestic plumbing pressures. It is not rated for high-pressure industrial or steam applications.
Avoid sharp kinks, as this can restrict flow and cause long-term fatigue in the hose material. Maintain a gentle radius for all bends.
Yes, it is supplied ready to install with necessary seals for the 1/2" BSP interface.
Ensure the pipe is pushed fully into the fitting and check that the olive is not damaged. Tighten the nut slightly more, but do not overtighten.
Verify that a rubber or fiber washer is present and correctly seated. If damaged, replace the washer.
To install, ensure the copper pipe end is clean, deburred, and free from scratches. Slide the compression nut and olive onto the copper pipe, insert the pipe into the connector, and tighten the nut using a spanner until firm. For the 1/2" BSP end, always ensure a clean fiber washer or rubber seal is present before tightening onto the tap tail. Avoid over-tightening the compression nut, as this can deform the olive and cause leaks. Periodically check the connections for signs of weeping, especially after the first 24 hours of use.
