Best current price£76.92from B&Q
Shopping.co.uk recommended and popular offers
B&Q£76.92Visit shop B&Q - Tiletastic Light Sand Stone Mosaic Stone Effect Self-Adhesive Vinyl Floor Tiles 30.5Cm X 30.5Cm X 0.9Cm (80 Tiles)80 Sqft
Visit shop2 offers from £76.92 - £85.11
View price history by clicking the chart icon.
These Tiletastic Light Sand Stone Mosaic Effect Self-Adhesive Vinyl Floor Tiles are designed for homeowners undertaking large-scale DIY renovations or multi-room projects, offering a cost-effective way to achieve a natural stone look. The primary benefit is the easy peel-and-stick installation, eliminating the need for grout or glue. A potential caveat is the requirement for a clean, smooth subfloor for optimal adhesion.
| Colour | Beige |
|---|---|
| Brand | HSD |
Each pack contains 80 tiles and covers approximately 80 square feet.
Yes, these tiles can be installed over existing smooth, well-adhered vinyl flooring. Ensure the surface is clean and dry.
No, these are self-adhesive tiles and do not require grout. They are designed for a grout-free installation.
Yes, the water-resistant wear layer makes them suitable for bathrooms and other moisture-prone areas, provided the subfloor is properly prepared and the installation is watertight.
Clean with a damp mop and a mild, non-abrasive floor cleaner. Avoid excessive water and abrasive cleaning tools.
No, these tiles require a smooth, clean, and dry surface for proper adhesion and a seamless finish.
Each tile measures 30.5cm x 30.5cm (approximately 12 inches x 12 inches).
Ensure the subfloor is completely clean, dry, and smooth. Re-press tiles firmly. For persistent issues, consider a suitable floor adhesive designed for vinyl tiles.
Lift the affected tile carefully and re-adhere, ensuring no trapped air. Check for any debris or unevenness on the subfloor beneath the bubble.
Use a sharp utility knife and a straight edge for clean cuts. Score the tile multiple times for a precise break.
Use appropriate cleaning tools (soft cloths, sponges) and mild cleaners. Avoid abrasive pads or harsh chemicals. For deep scratches, replacement of the affected tile may be necessary.
Setup: Ensure the subfloor is clean, dry, smooth, and free from debris. Sweep or vacuum thoroughly. Peel the backing from one tile at a time and press firmly onto the surface, starting from the center and working outwards. Overlap edges slightly if required by the specific tile pattern for seamless integration.
Compatibility: These tiles adhere best to smooth, non-porous surfaces such as existing vinyl, linoleum, sealed concrete, or smooth plywood. Avoid installation over carpet, textured surfaces, or freshly painted floors.
Care: Clean regularly with a damp mop and a mild, non-abrasive cleaner. Avoid using excessive water, as standing water can compromise the adhesive over time. For stubborn marks, use a soft brush or cloth. Protect from excessive heat and sharp objects that could scratch or cut the surface.
