SGS Air Compressor - 100 Litre - 3.0 HP - 13.8 CFM

The SGS 100 litre reciprocating air compressor is ideal for tools that require a constant supply o...

Best current price£304.48from eBay

All Offers

2 offers from £304.48 - £314.98

View price history by clicking the chart icon.

eBaySGS 100 Litre Air Compressor - 13.8CFM 3.0HP with Twin Air Outlets Direct Drive
Free delivery in 1–3 days
£304.48
Visit shop
B&QB&Q - 100 Litre Air Compressor13.8Cfm 3.0Hp With Twin Air Outlets Direct Drive
Free delivery in 1–3 days
£314.98
Visit shop

Product Information

Full details

This SGS 100-litre air compressor is designed for DIY and semi-professional users who need a reliable air source for tasks like spray painting, operating impact wrenches, and powering drills. Its key benefit is the powerful 3 HP motor and 100-litre tank, which ensure a constant air supply with minimal waiting time, maximizing your productivity. A primary caveat is that it is intended for DIY and semi-pro use only, not commercial applications.

All features

Model Part NumberSC100V
BrandSGS

Extended Product Information

FAQs

What type of oil does this compressor use?

The product information states it is shipped with trace oil and may require additional oil before first use. It's recommended to consult the user manual for the specific type and quantity of oil required for your SGS compressor.

Can I use this compressor for commercial painting jobs?

No, this compressor is specifically noted as being for DIY and semi-professional use only, not for commercial applications.

How often should I drain the air tank?

It is recommended to drain the air tank after each use to prevent moisture buildup, which can lead to corrosion and damage.

What is the warranty period for this product?

The SGS air compressor comes with a 2-year warranty.

Why was the safety valve ring removed?

Due to a change in EU legislation, the safety valve rings have been removed by manufacturers. The ring was sometimes misused to vent the compressor, causing undue wear. Air should now be drained from the tank via the dedicated valve on the belly of the tank.

Can I connect two different tools to the compressor at the same time?

Yes, the compressor is fitted with twin outlets with euro quick-release connectors, allowing two air-lines and tools to be connected simultaneously.

What is the maximum discharge pressure?

The discharge pressure is 115 PSI, which is equivalent to 8 bar.

Troubleshooting

Compressor not starting

Ensure the power cord is securely plugged into a working outlet. Check the main switch and circuit breaker. Verify the oil level is adequate.

Low air pressure output

Check that the pressure regulator is set correctly. Inspect air hoses and connections for leaks. Clean or replace the air filter if it is clogged. Ensure the tank is fully pressurized.

Compressor is excessively noisy

Ensure the compressor is on a stable, level surface. Check for loose fittings or components. The rated sound level is 97dB, which is typical for this type of unit.

Water leaking from the tank drain valve

This is normal after the tank has been pressurized and then drained, as condensed water is released. Ensure the valve is fully closed after draining.

Pros and Cons

Pros

  • Provides a consistent and ample supply of compressed air for a variety of air tools.
  • Short pressurization time due to the powerful 3 HP motor.
  • Dual air outlets allow for simultaneous use of two tools.
  • Built to high standards with safety certifications.
  • Includes a pressure regulator for controlled air delivery.
  • Suitable for a wide range of DIY and semi-professional tasks.

Cons

  • Not intended for commercial use.
  • Requires additional oil before first use.
  • Operates at a relatively high sound level (97dB).
  • Safety valve ring removed as per new EU legislation; air must be drained via the tank valve.

Setup, Compatibility & Care

Initial Setup:

  1. Unpack the compressor carefully, checking for any visible damage.
  2. Important: Before first use, check the oil level and add appropriate compressor oil if necessary. The unit is shipped with trace oil and may require additional oil.
  3. Ensure the compressor is placed on a stable, level surface in a well-ventilated area.
  4. Connect the included 13A UK plug to a suitable power outlet.

Compatibility:

  • The air outlet is a 1/4" BSP fitting compatible with standard Euro quick-release connectors.
  • Requires a 230V, 50Hz power supply with a 10A current draw.

Care and Maintenance:

  • Drain Tank: Regularly drain the air tank to prevent moisture buildup and rust. Use the valve located on the belly of the tank. This also serves to drain the water that accumulates.
  • Filter: Check and clean the air intake filter periodically to ensure optimal performance.
  • Oil Level: Monitor the compressor oil level and top up as needed according to the manufacturer's recommendations.
  • Cleaning: Wipe down the exterior with a damp cloth. Avoid using solvents or abrasive cleaners.
  • Storage: Store in a dry, protected area when not in use.

Price History

DatePrice
Visit shop