SIP Sanding Disc - 8" - 60 Grit

A 60 grit disc is considered coarse and is primarily used for aggressive material removal, rough shaping, and stripping finishes like paint or varnish.

No, the 60 grit is too coarse for fine finishing. You will need to use finer grit discs (e.g., 120, 180, 220 grit) after using this coarse disc to achieve a smooth surface.

This disc is designed for woodworking and is effective on various wood types, from softwoods to hardwoods, for initial stock removal and shaping.

Replace the disc when the abrasive surface is visibly worn down, clogged with debris, or no longer effectively removing material. A significant drop in performance is a clear indicator.

No, this disc is specifically designed and intended for use on wood only.

The 'P' before the grit number indicates it meets European P-grade standards for abrasive grit classification. P60 is a coarse grit.

Ensure the sander's backing pad is clean and free of dust or debris. Verify that the disc is correctly aligned and pressed firmly onto the pad.

Check that the disc is centered correctly on the sander's pad. Ensure the sander itself is in good working order and not damaged.

Confirm you are using the correct grit for the material and task. For very hard materials or significant shaping, ensure you are applying adequate, consistent pressure.

This is expected with heavy use and coarse grits on certain woods. Ensure you are not applying excessive force, which can prematurely wear the abrasive.