Whispers - Trellis Die - Go Craft Distribution DVW-353
Best current price£5.57from Go Craft
Best offers
Shopping.co.uk recommended and popular offers
Go Craft£5.57Visit shop Whispers - Trellis
Visit shopGo Craft£5.57Visit shop One Offer
1 offer from £5.57
View price history by clicking the chart icon.
Product Information
Full details
This guide is for crafters, hobbyists, and DIY enthusiasts looking to add intricate trellis patterns to their projects. The key benefit is the ability to cut precise, detailed shapes from various materials in a single pass. A caveat to consider is that these are thin metal dies, requiring a compatible die-cutting machine for optimal results.
All features
| Model Part Number | DVW-353 |
|---|---|
| Brand | Go Craft Distribution |
Extended Product Information
FAQs
What materials can this die cut?
This die is designed to cut cardstock, vinyl, vellum, foam, thin chipboard, cork, metallic paper, and felt.
Do I need a special machine to use this die?
Yes, you will need a compatible manual die-cutting machine to use this die effectively.
How do I clean the die?
You can clean the die with a small brush or compressed air to remove debris. A damp cloth can be used, but ensure it is dried thoroughly afterward. Store flat in a dry location.
What is the size of the trellis pattern?
The trellis pattern measures approximately 3 7/8 inches by 3 inches (98mm x 76mm).
What does the ejection foam do?
The ejection foam is included with the die and helps to push the cut-out pieces out of the die after cutting, making removal easier and faster.
Is this die compatible with electric die-cutting machines?
While primarily designed for manual machines, it is generally compatible with electric machines that use a similar sandwich system, provided the pressure settings are appropriate for thin dies.
Where is this die manufactured?
This die is manufactured in the USA.
Troubleshooting
Die not cutting completely through material
Ensure the die-cutting machine is set to the correct pressure for the material being used. You may need to add an additional shim or cutting plate to increase pressure. Check that the die is positioned correctly with the cutting edge facing the material.
Material tearing or getting stuck in the die
Try using a slightly thinner material or adjust the pressure on your die-cutting machine. Ensure the ejection foam is properly aligned with the die cuts. For very intricate cuts, a wax paper shim between the die and material can sometimes help with release.
Difficulty removing cut pieces
Ensure the ejection foam is still in good condition and properly seated. Gently push the cut pieces out from the back. If pieces are stubbornly stuck, a craft pick or spatula can be used with care.
Die appears bent or damaged
Handle the thin metal dies with care. If a die is slightly bent, it may still be usable, but it could affect the quality of the cut. Minor bends can sometimes be straightened gently. For significant damage, replacement may be necessary.
Pros and Cons
Pros
- Cuts intricate trellis designs with precision.
- Works with a wide range of crafting materials.
- Includes ejection foam for easy project completion.
- Designed for simple, one-pass cutting.
- Compatible with many popular die-cutting machines.
- Durable construction, made in the USA.
Cons
- Requires a separate die-cutting machine to use.
- Thin dies may require careful handling to avoid bending.
- Not suitable for cutting thick or heavy materials like fabric or wood.
- The 'Whispers' design may be delicate for very young crafters to handle independently.
Setup, Compatibility & Care
Setup: To use the Whispers - Trellis Die, you will need a compatible die-cutting machine. Place the die onto your cutting mat or platform, material on top of the die, and run through your machine according to its specific instructions. Always ensure the cutting edge of the die is facing the material you wish to cut.
Compatibility: This die is designed to be compatible with most standard manual die-cutting machines. It is 100% lead-free and built to work with a variety of crafting materials including cardstock, vinyl, vellum, foam, thin chipboard, cork, metallic paper, and felt.
Care: After use, remove any paper or material remnants from the die. A small brush or compressed air can be helpful for cleaning intricate areas. Store the die flat in a dry place to prevent rust or damage. Avoid excessive force or bending, as the dies are thin metal. Cleaning with a damp cloth is acceptable, but ensure the die is dried thoroughly afterward.