Nilight D Ring Shackle with Towing Pulley - 3/4" D Ring Shackle - 4.75 Ton - 7/8" Pin

Each Nilight D Ring Shackle has a working load limit of 4.75 tons, which is equivalent to 9,500 Lbs.

The integrated pulley acts as a snatch block, allowing you to redirect the winch line and effectively double the pulling power. This can help extract heavily stuck vehicles and reduce strain on the winch motor.

These accessories reduce noise and vibration caused by the shackle, and they protect your vehicle's paint or finish from scratches during recovery operations.

Yes, these shackles are designed to work with both steel cable and synthetic rope.

The screw pin for these shackles is 7/8" in diameter.

While designed for heavy-duty recovery, its high capacity and secure attachment make it suitable for certain towing applications where a secure anchor point is needed, provided the load does not exceed its rated capacity.

Regularly clean the shackles with water and mild soap, and dry them thoroughly. Avoid abrasive cleaners that could damage the coating. Minor scratches can be touched up with compatible paint.

Ensure the black isolators and washers are correctly installed between the shackle and the vehicle's recovery point, and that the screw pin is fully tightened.

Check for debris or cross-threading. Clean the threads and try again. If the issue persists, contact customer support.

Clean the affected area with a wire brush and apply a rust inhibitor or touch-up paint matching the powder coat. Regular cleaning and drying can prevent corrosion.

Inspect the pulley for dirt or debris. Clean thoroughly and lubricate lightly with a suitable lubricant if necessary, ensuring not to compromise grip on the rope/cable.