Best current price£240.03from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£240.03Visit shop Schneider Electric Preventa Limit Switch M Locking Function - Xcste7311
Visit shop2 offers from £240.03 - £615.31
View price history by clicking the chart icon.
The Telemecanique Sensors XCSTE7311 is a solenoid interlock switch designed for industrial safety applications. It's ideal for machinery where access to hazardous areas must be prevented until a machine cycle is complete and safe. A key benefit is its robust metal Zamak construction and IP67 rating, ensuring durability in harsh environments. However, its slow-break (break before make) contact mechanism requires careful integration into safety circuits to ensure proper function.
| Series | Preventa |
|---|---|
| Model Part Number | XCSTE7311 |
| Brand | Telemecanique Sensors |
It means that the safety contacts (NC) will open *before* the interlock mechanism is physically released. This is a critical safety feature ensuring power is cut to the hazardous part of the machine prior to allowing access.
This feature means the interlock mechanism will only release (unlock) when the solenoid coil is energized with 24 V ac/dc. If power is lost to the solenoid, the switch will automatically lock.
This switch is designed for use with compatible actuators, often metal key-type actuators, to ensure the correct engagement and reliable operation of the interlock.
The Telemecanique Sensors XCSTE7311 comes with an 18-month warranty period from the date of purchase.
With an IP67 rating, it offers high protection against dust and water ingress, making it suitable for many outdoor or exposed industrial applications, provided it is installed correctly with appropriate cable glands.
Typically, after the hazardous condition is cleared and the machine is stopped, power is removed from the solenoid (if 'Power to Unlock'), allowing the interlock to engage. The operator may then need to use the key to reset or operate the switch for access.
The XCSTE7311 is equipped with 2 Normally Closed (NC) safety contacts.
Verify the actuator is fully engaged with the switch. Check wiring to the safety contacts (2NC) and ensure they are correctly wired to the safety control circuit. Confirm the solenoid is de-energized if 'Power to Unlock' is used.
Check the 24 V ac/dc power supply to the solenoid coil. Ensure the voltage is correct and stable. Inspect the solenoid coil for damage. Verify that the safety circuit is not preventing unlock (e.g., through auxiliary feedback).
Inspect the slow-break contacts for wear or damage. Ensure the actuator mechanism is not binding. Review the entire safety circuit wiring and configuration for potential errors. Consult the product manual or contact support.
Inspect the housing seals and conduit entry points for damage. Ensure the PG11 cable gland is correctly installed and tightened. Replace the switch if ingress is detected, as its protective capability may be compromised.
Setup:
Compatibility:
Care:
