Best current price£4.99from eBay
Shopping.co.uk recommended and popular offers
eBay£4.99Visit shop Chromed Threaded Pipe Coupling Reducer Female Fittings 1/2 x 3/8 3/4 x 1/2
Visit shop
B&Q£6.99Visit shop B&Q - 1/2X3/8 Inch Pipe Connection Reduction Female Fittings Coupler Chrome
Visit shop2 offers from £4.99 - £6.99
View price history by clicking the chart icon.
This Invena Pipe Connection Reduction Muff is designed for plumbers and DIY enthusiasts working with water mains and central heating systems, offering a reliable way to reduce pipe size from 1/2" to 3/8". Its key benefit is providing a secure and leak-free connection between pipes of different diameters. A potential caveat is its specific thread type (Female x Female), requiring careful attention during installation to ensure compatibility with existing fittings.
| Model Part Number | 1/2" x 3/8" |
|---|---|
| Brand | Invena |
The primary function is to connect a 1/2" pipe or fitting to a 3/8" pipe or fitting, reducing the diameter for system modifications or repairs.
It features a Female x Female thread type, meaning it connects onto male threads.
It can handle a maximum working temperature of 95°C and a maximum working pressure of 1.0 MPa.
No, this reduction muff is designed specifically for water mains and central heating systems.
Clean with a soft, damp cloth. Avoid abrasive cleaners to maintain the finish.
No, this is a reduction muff, designed to connect pipes of different sizes (1/2" to 3/8").
Typically, it connects male threaded pipes or fittings commonly found in plumbing, such as pipe ends or valve connections.
Check if thread sealant or tape was applied correctly. Ensure threads are clean and undamaged. Tighten the connection slightly, or reapply sealant and re-tighten.
Verify that you are using the correct male threaded fittings (one 1/2" and one 3/8"). Ensure threads are clean and free from debris. Check for cross-threading.
Ensure the product is used within its intended environment (water mains, central heating). Clean with a soft, damp cloth. For minor surface issues, a chrome polish might help, but extensive corrosion may indicate a need for replacement if functionality is compromised.
Setup: Ensure both connecting pipes or fittings have the correct female thread size (1/2" and 3/8" respectively). Apply appropriate thread sealant or tape to the male threads of the pipes being connected before screwing them into the muff. Tighten securely, but avoid over-tightening, which could damage the threads.
Compatibility: This muff is compatible with standard male threaded pipes and fittings of 1/2" and 3/8" dimensions. It is intended for use in water mains and central heating systems. Verify that the system's operating temperature and pressure do not exceed the muff's maximum ratings (95°C and 1.0 MPa).
Care: Clean the exterior with a damp cloth. Avoid using abrasive cleaners that could damage the chrome finish. Periodically check connections for any signs of leaks, especially after initial installation or system pressure changes.
