Best current price£28.68from eBay
Shopping.co.uk recommended and popular offers
eBay£28.68Visit shop US PRO Tools 6pc 1/2"" Dr Calibrated Torque Wrench 13.6-203.5nm 10-150ft-Lb 6845
Visit shop1 offer from £28.68
View price history by clicking the chart icon.
This guide is for anyone using the US PRO Tools 6pc 1/2" Dr Calibrated Torque Wrench (model 6845). It's designed for professionals and DIY enthusiasts who need precise torque control for mechanical work. The key benefit is accurate tightening of bolts and fasteners, but remember to always use the correct torque specifications for your application. This guide provides instructions on setup, usage, and maintenance to help you get the most out of your torque wrench.
| Model Part Number | 6845 |
|---|---|
| Brand | us pro |
The wrench is calibrated to a tolerance of ± 4% in accordance with DIN ISO 6789-1:2017.
The torque range is 13.6-203.5 NM (10-150 ft.lb).
The kit includes sockets (17mm, 19mm, 21mm), a 125mm extension bar, and a 1/2" Female x 3/8" Male drive adapter.
The wrench measures torque in the clockwise direction only.
The wrench has a 1/2" drive mechanism.
Refer to the product manual for recommended calibration intervals. Typically, torque wrenches should be calibrated annually or after significant use.
Store the torque wrench in its protective case when not in use.
No, this torque wrench measures torque in the clockwise direction only.
Check the torque setting and ensure it is correct. Make sure the mechanism is not locked. If the problem persists, the wrench may need calibration or repair.
Verify the torque setting. Check that you are pulling the wrench perpendicular to the fastener. Ensure the wrench has been calibrated recently.
Inspect the socket and the wrench's release mechanism for any obstructions or damage. Clean the release mechanism and ensure the socket is properly seated.
The US PRO Tools torque wrench is compatible with standard 1/2" drive sockets. Ensure that the sockets are in good condition and suitable for the intended application.
