Flopro Supergrip Waterstop Spray Gun Connector - 12.5mm (1/2in)

'Waterstop' refers to the connector's internal valve that automatically stops the water flow when you disconnect a spray gun or other accessory.

This connector is specifically designed for 12.5mm (1/2 inch) garden hoses and is compatible with most major watering brands due to its 'Snap Fit' system.

The ABS plastic used is described as 'ultra-tough' and 'superior,' designed to withstand regular use and outdoor environmental conditions, providing longevity.

No, the 'Snap Fit' mechanism is designed for tool-free connection. It uses a stainless steel internal spring for easy, secure attachment and detachment.

It's good practice to check for debris at connection points regularly. A simple clean with a damp cloth is sufficient when needed. Avoid abrasive cleaners.

The 'Waterstop' feature is beneficial for any accessory where you might disconnect it frequently, including sprinklers, other types of nozzles, or watering wands.

The extended clench mechanism provides a stronger, more permanent grip on the hose, significantly reducing the risk of the hose becoming detached under pressure.

Ensure the accessory is fully detached. Check if the internal valve within the connector is obstructed by debris; clean if necessary. If the issue persists, the valve may be faulty.

Remove the connector and reattach, ensuring it is pushed on as far as possible for the clench mechanism to engage fully. Check the hose end for damage or deformation.

Ensure both the connector and the accessory's male end are clean and free of dirt or grit. A slight twisting motion while connecting/disconnecting might help.

Verify that you are using a 12.5mm (1/2 inch) hose. This connector is not designed for other hose sizes.