Best current price£3.30from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£3.30Visit shop Schneider Electric EZ9F16106 EASY9 6A 1 Pole Type B Miniature Circ...
Visit shop15 offers from £3.30 - £9.75
View price history by clicking the chart icon.
10 offers from £4.70 - £7.30
View price history by clicking the chart icon.
This Schneider Electric Easy9 Miniature Circuit Breaker (32A, 1 Pole, Type B, 6kA) is designed for residential and commercial applications to provide essential short-circuit and overload protection for electrical circuits. Its primary benefit is safeguarding cables and equipment from damage caused by electrical faults, ensuring system safety. A key consideration is its specific Type B tripping curve, which is suited for circuits with low inrush currents.
| Series | Easy9 |
|---|---|
| Model Part Number | EZ9F16132 |
| Brand | Schneider Electric |
Type B indicates the tripping characteristic. For a Type B breaker, the overcurrent release operates between 3 to 5 times the rated current. This makes it suitable for circuits with low inrush currents, such as lighting and socket outlets.
Overload protection is designed to protect against a gradual increase in current that lasts for a period, often due to too many appliances. Short-circuit protection is for sudden, very high surges of current that occur when there is a direct fault path.
The Type B tripping curve is generally not recommended for motors, as motors have high inrush currents when starting, which could cause nuisance tripping. Type C or Type D breakers are typically better suited for motor loads.
A 6kA breaking capacity means the circuit breaker is capable of safely interrupting a fault current of up to 6,000 amperes without being damaged. This is suitable for most residential and small commercial installations.
This specific model is rated for 230V AC. You should select a breaker with the correct voltage rating for your electrical system. Using an incorrect voltage rating can be dangerous.
Consider the type of load (lighting, motor, heating), expected inrush current (tripping curve A, B, C, D), the circuit's rated current, and the maximum prospective fault current at the installation point. Always consult with a qualified electrician for precise selection.
Check for overloaded circuits. Reduce the number of appliances on the circuit or consider upgrading to a higher-rated breaker if appropriate and safe. Inspect wiring for any signs of damage or loose connections.
Ensure the fault condition has been cleared. If the breaker is damaged, it may need replacement by a qualified electrician. Do not force the breaker.
Verify that the breaker is correctly installed and fully switched on. Double-check all connections for proper seating and ensure the upstream supply is live. Consult an electrician if issues persist.
Setup: This MCB is designed for DIN rail mounting within electrical distribution boards or enclosures. Ensure the power to the circuit is completely isolated before installation. Connect the line conductor to the designated terminal and the load to the other. Refer to wiring diagrams and local electrical codes for correct installation procedures.
Compatibility: This is a single-pole (1P) MCB and is compatible with standard 35mm DIN rail systems. It is rated for 230V AC and should be used with circuits that have fault current levels not exceeding its 6kA breaking capacity. Always check the specifications against your system requirements.
Care: The Easy9 MCB requires minimal maintenance. Keep the unit clean and free from dust and debris. Ensure the electrical enclosure it is housed in is properly ventilated. Periodically check for any signs of damage or overheating, and consult a qualified electrician if any issues are observed.
