Stonecare4U Driveway Cleaner is a high-performance, alkaline-based cleaner for external natural st...Stonecare4U Driveway Cleaner is a high-performance, alkaline-based cleaner for external natural stone driveways, suitable for all outdoor stone & masonry surfaces. It effectively removes dirt, algae, lichen, black spots, weeds, moss, and leaf mulch. Unlike acid cleaners, this solution won’t damage or etch the surface. For best results, apply neat or diluted 1:1 with water (test a small area first to determine ideal dilution and dwell time). Pre-clean loose debris and wear appropriate safety gear. Apply using a sprayer or watering can and keep the surface wet for at least one hour, agitating stubborn stains with a brush. After a two-hour dwell time (extend to four hours or overnight for extreme soiling), rinse thoroughly with water, then power wash for a pristine finish. Avoid contact with vegetation and rinse immediately if contact occurs. May slightly lighten some surfaces; test in an inconspicuous area first. Contains a chlorine-type agent, avoid contact with fabrics and tarmac. Coverage: Up to 50m² per 5L (1:1 dilution). Coverage varies with soiling.
The StoneCare4U Driveway Cleaner is designed for homeowners with natural stone driveways looking to tackle tough outdoor grime. Its key benefit is an effective, non-etching alkaline formula that removes dirt, algae, lichen, black spots, weeds, and moss without damaging the stone. A potential caveat is that it may slightly lighten some surfaces, requiring a test patch first, and requires careful handling around vegetation and fabrics.
All features
Colour
Green
Brand
StoneCare4U
Extended Product Information
FAQs
What types of stone is this cleaner suitable for?
This cleaner is designed for external natural stone driveways and other outdoor stone and masonry surfaces.
Can I use this cleaner on painted surfaces?
The product information does not specify suitability for painted surfaces. It is recommended for natural stone and masonry. Always test in an inconspicuous area first.
How long should I leave the cleaner on the driveway?
You should keep the surface wet with the cleaner for at least one hour. For lighter soiling, two hours of dwell time is recommended. For extreme soiling, extend the dwell time to four hours or even overnight.
Is this product safe to use near plants?
No, you must avoid contact with vegetation. If contact occurs, rinse the vegetation immediately and thoroughly with water.
What is the coverage rate?
With a 1:1 dilution, the coverage is up to 50m² per 5L. Coverage will vary depending on the level of soiling and the dilution used.
Can I use this on my patio?
Yes, it is suitable for all outdoor stone and masonry surfaces, including patios.
What safety precautions should I take?
Wear appropriate safety gear, including gloves and eye protection. Avoid contact with fabrics and tarmac. Ensure good ventilation during use.
Troubleshooting
Cleaner not removing stains effectively
Ensure the surface remained wet for the full recommended dwell time. For stubborn stains, try applying the cleaner neat or extending the dwell time further (up to overnight). Agitate stubborn spots with a stiff brush.
Stone appears lighter after cleaning
This can happen as the cleaner lifts ingrained dirt. Perform a smaller test patch first in the future to assess color change. For severe lightening, consider a stone-rejuvenating product suitable for your stone type.
Cleaner has contacted vegetation
Rinse the affected vegetation immediately and thoroughly with plenty of water. Monitor the plants for any signs of distress.
Product is difficult to rinse off
Ensure you are using ample amounts of water. A power washer significantly aids in thorough rinsing and removal of the cleaner residue.
Pros and Cons
Pros
Effectively removes a wide range of organic growth and dirt.
Safe for natural stone and masonry, avoids etching.
Can be diluted for tailored cleaning power.
Suitable for various outdoor stone surfaces.
Provides a deep clean when used as directed.
Cons
May slightly lighten some stone surfaces.
Requires significant dwell time (minimum 1 hour, up to overnight).
Requires thorough rinsing, preferably with a power washer.
Must avoid contact with vegetation, or rinse immediately.
Contains a chlorine-type agent, avoid contact with fabrics and tarmac.
Setup, Compatibility & Care
Setup:
Preparation: Sweep away any loose debris, leaves, or dirt from the driveway.
Safety Gear: Wear appropriate safety gear, including gloves and eye protection.
Testing: Always test the cleaner on a small, inconspicuous area of your driveway first to determine the ideal dilution and dwell time, and to check for any adverse effects on the stone's color.
Dilution (if necessary): For general cleaning, dilute the product 1:1 with water. For heavier soiling, use neat or with less dilution. Consult the test patch results.
Application:
Apply: Use a sprayer or watering can to apply the cleaner evenly over the stone surface.
Keep Wet: Ensure the surface remains wet with the cleaner for at least one hour. Reapply small amounts of water if it starts to dry out.
Agitate: For stubborn stains, use a stiff brush to agitate the area during the dwell time.
Dwell: Allow the cleaner to dwell for a minimum of two hours. For extreme soiling, extend dwell time to four hours or overnight.
Rinse: Thoroughly rinse the entire surface with water. A power washer is recommended for the best finish.
Compatibility:
Suitable for all outdoor natural stone and masonry surfaces.
Caution: Avoid contact with vegetation; rinse immediately if contact occurs. Avoid contact with fabrics and tarmac as the product contains a chlorine-type agent.
Care:
Store the product in a cool, dry place, away from direct sunlight and incompatible materials.
Keep the container tightly closed when not in use.
Clean up spills immediately to prevent damage to surrounding surfaces or vegetation.