Best current price£2.27from Norbreck bathrooms
Shopping.co.uk recommended and popular offers
Norbreck bathrooms£2.27Visit shop Norbreck Bathroom & Tile Centre Tile Rite - 3Mm Long Leg Tile Spacer 250
Visit shop2 offers from £2.27 - £8.99
View price history by clicking the chart icon.
This guide is for professional tilers seeking precise tile alignment. The Tile Rite Long Leg Tile Spacer in 3mm offers consistent spacing for a professional finish on floor tiles. A limitation is that delivery is restricted to certain geographical locations.
| Model Part Number | TSL486* |
|---|---|
| Brand | Tile Rite |
These 3mm tile spacers are designed for professional tilers to ensure accurate alignment and consistent spacing between floor tiles, resulting in uniform grout lines.
While primarily marketed for floor tiles, they can also be used for accurate alignment of wall tiles, especially where a precise, narrow grout line is required.
No, these are specifically 3mm spacers. For different grout line widths, you would need spacers of corresponding sizes.
The product information specifies 'BAGS', indicating they are supplied in quantity, but the exact number per bag is not detailed. They are intended for project use.
The long leg design provides greater stability and support during tile placement, helping to keep the spacers securely in position and ensuring more accurate alignment.
These are generally considered disposable items, intended to be removed after the tiles are set. While in some very clean applications they might be reused, their design and material are optimized for single-use placement.
Ensure a spacer is placed at every corner where tiles meet. Check that the spacers are fully seated against the tile edges and that the floor surface is relatively level. Remove and reapply spacers if necessary.
While designed to be removed easily, in some cases grout can harden around them. Try to gently wiggle the spacer before the grout fully sets. If hardened, carefully use a utility knife or grout rake to break the bond before pulling.
Verify that the correct number of spacers are being used consistently around each tile. Ensure the spacers themselves are not damaged or warped. Check that tiles are being laid flat and not on an angle.
Setup: These are manual positioning aids. Simply place one spacer at each corner where four tiles will meet, or between tiles as needed to maintain the desired 3mm gap. Ensure they are fully seated against the tile edges for best results.
Compatibility: The 3mm size is ideal for standard floor tiling applications where a consistent, narrow grout line is desired. They are compatible with most common tile types, including ceramic, porcelain, and natural stone.
Care: As disposable items, detailed care is not required. However, to maintain a clean working environment, it is advisable to keep the spacers in their original packaging or a clean container when not in use. Avoid contamination with adhesives or grout to prevent transfer to tile surfaces.
