Ball End Hat & Coat Hook - Hammer and Tongs - Bronze

The hook is forged from durable cast iron.

This product comes with a 2 Year Warranty.

No, this product is not suitable for bathrooms or unheated/damp rooms due to the risk of rusting.

Regular maintenance with a household wax polish is required to help prevent rusting. Ensure it is installed in a dry environment.

All measurements provided are approximate as this product is handmade.

You will need a drill for the pilot hole and a screwdriver for hand-tightening. Do not use a power screwdriver or drill.

It means the hook has two points or arms for hanging items, which helps with organisation and space-saving.

Ensure a pilot hole was drilled. If the hole is too small, widen it slightly. If the screw head strips, you may need to carefully remove it and try a new screw after re-drilling the pilot hole.

This is expected in damp environments. Immediately clean the rusted area and apply a suitable metal wax polish. Ensure the hook is located in a dry, heated room as per the product's limitations.

The fixings may not be secure. Remove the hook, check the wall plugs (if used) and ensure they are suitable for your wall type. Re-drill pilot holes if necessary and securely tighten screws by hand.